NDT Training Courses in Billings, MT
Training options in Billings cluster around the city's refining sector — local providers calibrate their syllabi to the equipment, codes, and acceptance criteria the local employers actually use. Expect the controlling-codes module to spend most of its hours on API 510 / 570 and PHMSA rather than the broad survey of every code that a national-syllabus course would cover. Most ASNT Level II classroom courses in Billings run between 40 and 80 hours per method (UT being on the long end, PT on the short), followed by hands-on lab time and the documented experience hours that the written practice requires. Local credentialing infrastructure: Northern Rockies ASNT Section runs the chapter meetings, hosts the bi-monthly technical talks, and is where graduates network into their first inspection roles. Hands-on lab work in Billings draws specimens and procedure references from the real local fleet: ExxonMobil Billings Refinery (refinery); Phillips 66 Billings Refinery (refinery); CHS Laurel Refinery (refinery). Trainees finish the course with familiarity to the kinds of equipment they'll see on day one. Industry weighting drives method emphasis: Refining (45% of local industrial base) and Pipelines (15% of local industrial base) dominate Billings's training calendar — schools schedule UT, PAUT, and (where applicable) RT classes ahead of the smaller-volume MT/PT courses. The codes module in Billings courses spends extra time on MT DEQ and MT Boiler Code 50-74-101 because those are the local-authority references that show up in procedure-writing exam questions and in real-world rejection notes from inspectors here. Career math: completing Level II training in Billings unlocks the ~$81,000/yr band; the further progression to Level III lifts pay by ~$41,000/yr — that gap is what most trainees plan their next 3-5 years against. Specialty pipelines worth knowing about: Three refineries in 30-mile corridor — only such cluster in northern Rockies; Processes Bakken light + Canadian heavy crude blends.
Available courses in Billings
| Course | Hours | Typical Fee | Prerequisite |
|---|---|---|---|
Ultrasonic Testing — Level II Code: UT-LII | 80 h | $1,900 | High school maths; UT Level I documented experience hours |
Radiographic Testing — Level II Code: RT-LII | 80 h | $2,400 | Radiation safety course + RT Level I experience hours |
Magnetic Particle — Level II Code: MT-LII | 16 h | $850 | High school qualification; MT Level I experience hours |
Liquid Penetrant — Level II Code: PT-LII | 16 h | $750 | High school qualification; PT Level I experience hours |
Phased Array Ultrasonic Testing Code: PAUT | 80 h | $3,200 | ASNT Level II UT + 280 h documented PAUT experience |
Guided Wave Testing Code: GWT | 40 h | $2,400 | ASNT Level II UT + system-vendor training |
API 510 Pressure Vessel Inspector — Exam Prep Code: API-510 | 60 h | $2,200 | Inspection experience to API 510 §1.2 eligibility |
API 570 Piping Inspector — Exam Prep Code: API-570 | 60 h | $2,200 | Piping inspection experience to API 570 §1.2 eligibility |
Fees are 2026 ballparks based on national survey averages adjusted for local market conditions; ask the provider for the current schedule.
Methods most-used by Billings employers
Local job ads in Billings most commonly call for: UT thickness; PAUT for high-temperature piping; RT on weld repairs; MT/PT on critical welds; UT thickness on long-seam pipe; GWT; MFL inline inspection; MFL. Course selection should follow the methods you intend to chase work with first.
Local accreditation pathway
The accreditation route in Billings follows the same structure as the rest of the U.S. NDT industry: classroom training, documented experience hours under a Level III's written practice, vision and physical examinations, and a series of method-specific examinations. For refining and pipeline work, plan to layer API 510 / 570 / 653 individual certifications on top of the underlying ASNT credentials — those API tickets are what unlock the inspection-engineer pay grade. The Northern Rockies ASNT Section runs the local technical-meeting calendar and is the most efficient on-ramp for documented experience-hour signoffs from a Level III sponsor.
Who hires after this training
Once certified, the most active local hiring channels are inspection-services contractors with MSAs at ExxonMobil Billings Refinery (Refinery), Phillips 66 Billings Refinery (Refinery); the asset-owner mechanical-integrity teams at the same facilities also bring inspectors directly onto staff for owner-user inspection roles.
Training FAQs
How long does ASNT Level II training take in Billings?
Classroom training time is method-specific: UT Level II runs about 80 hours, RT Level II about 80 hours, MT and PT Level II about 16 hours each. Documented experience hours under your written practice run in parallel and are not bypassed by the classroom course. Northern Rockies ASNT Section hosts the local exam sittings.
What does NDT certification cost in Billings?
Course fees in Billings typically run $750-$2,400 per ASNT Level II method, with PAUT and TOFD specialty courses at the upper end ($2,200-$3,200). API 510/570/653 exam-prep courses run $1,800-$2,500. Many local employers offer tuition reimbursement once you are on staff.
Where do graduates of Billings NDT courses end up working?
Once certified, the most active local hiring channels are inspection-services contractors with MSAs at ExxonMobil Billings Refinery (Refinery), Phillips 66 Billings Refinery (Refinery); the asset-owner mechanical-integrity teams at the same facilities also bring inspectors directly onto staff for owner-user inspection roles.
What practical experience do Billings NDT courses provide?
Hands-on lab work in Billings typically includes specimens that mirror the real local fleet — ExxonMobil Billings Refinery (refinery) and similar sites. Trainees finish with familiarity to the equipment metallurgy and acceptance criteria they'll actually encounter on day one.
Which NDT methods are most useful to learn in Billings?
Industry weighting in Billings (Refining = 45% of local industrial base) drives the answer: UT thickness, PAUT for high-temperature piping, RT on weld repairs, MT/PT on critical welds are the methods most often listed on local job postings. Focus your training spend on those before specialty methods.
Do I need to learn local codes specific to Billings?
Yes — beyond the generic ASME/API curriculum, local-authority references like MT DEQ, MT Boiler Code 50-74-101, PHMSA apply in Billings and show up in procedure-writing exam questions. Most local courses spend 8-16 hours on the regional-code module specifically.
Salary bands, certifications and the local employer roster.
The companies that may sponsor your training and pay your wages.