ASTM E2373: Standard Practice for Ultrasonic Testing of Wrought Steel Using TOFD
Practice for time-of-flight diffraction ultrasonic testing covering procedures, calibration, and acceptance criteria. ASTM E2373 standardizes advanced TOFD methods.
ASTM International is a consensus body that publishes test methods and practices used inside other codes; ASTM E-series documents are the most widely cited NDT references in North America.
ASTM standards become enforceable when invoked by a contract, by another code such as ASME Section V, or by a regulator citing them as the controlling test method.
ASTM E2373 is invoked when the scope of work matches its title — standard practice for ultrasonic testing of wrought steel using tofd — and when the contract or regulatory regime cites it as the controlling document. In power and nuclear work, the inspection plan is built directly off the standard's tables; an auditor will cite the paragraph that was followed (or the one that was missed) when writing a finding. On petroleum and petrochemical equipment, ASTM E2373 usually feeds into a written mechanical-integrity program: inspection intervals, examination methods, and acceptance criteria are all traced back to a clause number in the document.
Methods covered
Industries
- Oil & Gas
- Power Generation
- Pipeline
- Personnel qualification: examinations under ASTM E2373 must be performed by inspectors qualified and certified to a recognised scheme (typically ASNT SNT-TC-1A, CP-189, or ISO 9712 depending on jurisdiction), with documented training hours, vision tests, and a controlling written practice.
- Written procedure: every examination requires a written, controlled procedure that names the method, equipment, calibration steps, scanning pattern, and acceptance criteria — and is qualified before first use.
- Acceptance criteria: indications are evaluated against the standard's tabulated limits (length, depth, alignment, frequency); any indication exceeding the criteria is recorded, dispositioned, and either repaired or evaluated for fitness-for-service.
- Documentation: examination reports must include enough information for a third party to reproduce the inspection — equipment serial numbers, calibration records, inspector ID, sketches of indications, and the controlling procedure revision.
ASTM standards are reviewed on a five-year cycle and either reaffirmed, revised, or withdrawn. Revisions to ASTM E2373 are generally evolutionary rather than revolutionary — clarifying language, adding new technique variants, or aligning with parallel ISO documents. The standard's designation includes the year of last revision (e.g. E709-21), and contracts that name a specific year freeze the inspection requirements to that revision.
A typical refinery turnaround applies ASTM E2373 to the inspection scope for high-temperature piping and pressure vessels: corrosion-monitoring locations are read with UT thickness gauges, girth welds on repaired sections are radiographed or PAUT-scanned, and any indication outside the standard's acceptance table is dispositioned through API 579 fitness-for-service before the unit restarts.
What does ASTM E2373 cover?
ASTM E2373 (Standard Practice for Ultrasonic Testing of Wrought Steel Using TOFD) is published by ASTM International. Practice for time-of-flight diffraction ultrasonic testing covering procedures, calibration, and acceptance criteria.
Is ASTM E2373 mandatory or voluntary?
ASTM E2373 is a consensus standard. It becomes mandatory when invoked by a contract, by another code that cites it (for example ASME Section V calling out an ASTM practice), or by a regulator that has adopted it into law in a specific jurisdiction.
Who is qualified to perform inspections under ASTM E2373?
Inspections under ASTM E2373 must be performed by personnel qualified and certified to a recognised NDT certification scheme — most commonly ASNT SNT-TC-1A or CP-189 in the United States, ISO 9712 in much of the rest of the world, and NAS 410 for aerospace work. The written practice that controls qualification must be in place before any examination is started.
Which other standards are commonly cited alongside ASTM E2373?
ASTM E2373 is most often cited together with the parent code that brings it into the contract — typically ASME Section V or VIII for U.S. pressure equipment, AWS D1.1 for structural welding, API 510/570/653 for in-service petroleum equipment, or the matching EN/ISO standard for European and international work.
Standard Code
ASTM E2373
Organization
ASTM International
Methods Covered
1 method(s)
Industries
3 sector(s)
Need clarification on NDT terminology used in ASTM E2373?
Browse NDT Glossary