Radiographic Testing in Beaumont
Ionising-radiation imaging (X-ray or gamma) of internal weld structure on film or digital detector.
Two refinery majors in 30 miles means two pre-job qualification systems running in parallel — the only way to avoid double-tracking certs is a single private vault.
How Radiographic Testing works
A radiation source (X-ray tube, Ir-192 or Co-60) projects through the test piece onto a film or DDA. Differential absorption maps internal density variations — porosity, slag, cracks, lack of fusion — onto the recorded image.
RT in Beaumont
Radiographic Testing in Beaumont is most often pulled into scope when refining or petrochemical operators need API 510 / 570 / 653-grade evidence that an asset is fit for continued service. The recurring sites — ExxonMobil Beaumont Refinery and Motiva Port Arthur (regional) — write RT into pre-job inspection plans because ionising-radiation imaging (x-ray or gamma) of internal weld structure on film or digital detector. Local contractors mobilise calibrated equipment, current ASNT Level II / III credentials, and procedure packages tied to ASME Section V and ASTM E94.
Quick facts
- Method: RT — Radiographic Testing
- Service area: Beaumont, TX
- Primary industries: Refining, Petrochemical
- Key standards: ASME Section V, ASTM E94
Where RT shows up on Beaumont jobs
Industry relevance
Refining and Petrochemical operators in Beaumont pull RT into routine and turnaround scopes. The named recurring sites include ExxonMobil Beaumont Refinery and Motiva Port Arthur (regional).
Acceptance criteria are written against API 510 / 570 / 653 and ratified at Level III sign-off for procedure qualification.
Compliance and safety
Radiographic Testing inspections in Beaumont reference ASME Section V, ASTM E94, ASTM E1032. Site-specific qualification matrices add operator-specific requirements on top.
Working with NDT Connect-listed providers ensures Level II/III currency, instrument-level calibration traceability, and digital record packages that survive audit retention demands.
Named Beaumont facilities served
Radiographic Testing scopes in Beaumont recur at the following operators and sites. Local contractors are pre-qualified at most of these gates.
ExxonMobil Beaumont Refinery
Refinery — RT scope routine
Motiva Port Arthur (regional)
Refinery — RT scope routine
Total Port Arthur (regional)
Refinery — RT scope routine
Applicable standards and codes
Radiographic Testing inspections in Beaumont are written and accepted against:
ASME Section V
ASTM E94
ASTM E1032
ISO 17636
API 1104
Local code authorities
Why RT is chosen
Permanent imaging record for audit retention
Excellent at volumetric defects (porosity, inclusions)
Less operator-dependent than UT
Typical applications
- •Pipeline girth-weld inspection per API 1104
- •Pressure-vessel longitudinal and circumferential welds per ASME Section VIII
- •Casting volumetric inspection on safety-critical components
- •Corrosion-under-insulation profile imaging
The NDT footprint in Beaumont, TX reflects refining's share of the local economy and the supporting petrochemical cluster. Hosts the LARGEST US refinery (ExxonMobil Beaumont post-2023 expansion at 632.5k bpd). Radiographic Testing (RT) sits inside the recurring scope mix that ExxonMobil Beaumont Refinery (632k bpd), ExxonMobil Beaumont Refinery, and the broader gulf coast operator base put on contract every cycle.
a compact metro of around 399K residents keeps the certified-contractor base deep enough to absorb fitness-for-service surges without losing schedule. Programmes typically rotate on multi-year intervals, and RT is the examination most often written into the procedure pack at the gate.
Two of top 5 US refineries within 25 miles — global unique density. Cost-of-living index 88.2 and the low transport surcharge band combine into the multiplier procurement teams budget against.
Code compliance on RT work in Beaumont, TX starts with the local authority stack — TPSC §757.001, TCEQ, Jefferson County environmental, Port of Beaumont USCG MARSEC. BPVC Sec V Art. 2 (RT) is the method-level technical standard procedures qualify against, with API 570, BPVC Sec VIII Div 1 UW-51 and B31.3 para 344.5 pulled in when scope crosses into refining territory. ExxonMobil Beaumont Refinery (632k bpd) typically requires currency on both layers before a contractor crosses the gate.
- TPSC §757.001
- TCEQ
- Jefferson County environmental
- BPVC Sec V Art. 2 (RT)
- BPVC Sec VIII Div 1 UW-51
- B31.3 para 344.5
Radiographic Testing (RT) day-rates in Beaumont, TX cluster between $645–$957 for Level II crews, with a typical mid-point near $801. The low transport-surcharge band and a cost-of-living index of 88.2 push rates near the national baseline (multiplier ×1.04). Local Level II inspector wages — $81,000 median per BLS — anchor that band. Outage windows add 25–40%; volume programmes negotiate 8–15% off.
| Line item | Rate | Detail |
|---|---|---|
| Hourly labour (Level II) | $81–$120/hr | standard programme rate |
| Hourly labour (Level III) | $159/hr | procedure qualification + disposition |
| Day rate (Level II) | $801/day | 8 hours, ≤30 km from base |
| Equipment surcharge | $291/day | instrument + consumables |
| Mobilisation | $325/trip | low transport-surcharge band |
| Outage / night-shift uplift | +25–40% | turnaround windows and weekend work |
Effective multiplier vs national base: ×1.04 · transport surcharge band: low.
Certified RT providers in Beaumont, TX typically serve a client base anchored by ExxonMobil Beaumont Refinery (632k bpd), Motiva Port Arthur Refinery (630k bpd) — largest in N. America, and other gulf coast operators. Posting a scope through NDT Connect routes the request to providers already pre-qualified at these gates — three to five parallel quotes typically return within 24–72 hours.
Major regional clients served
- ExxonMobil Beaumont Refinery (632k bpd)
- Motiva Port Arthur Refinery (630k bpd) — largest in N. America
- TotalEnergies Port Arthur
- Valero Port Arthur
- BASF Beaumont
RT's role in Beaumont, TX's inspection economy is anchored to refining: Beaumont-Port Arthur is the densest refining cluster in US — 1.45M bpd in 25 miles. The technique earns its keep on nozzle-to-shell weld inspection, and local pre-job plans are written around recurring asset populations where common defects have to be screened out before return-to-service.
On the ground, that translates to programme inspection windows as the dominant scope, with fitness-for-service surges layered on every cycle. ExxonMobil Beaumont Refinery (632k bpd) typically locks in standing-order coverage; smaller operators time spot-buys against contractor availability. The local pace — measured in realistic shift throughput — is what sets contractor utilisation and, downstream, the rate band procurement should expect.
Hosts the LARGEST US refinery (ExxonMobil Beaumont post-2023 expansion at 632.5k bpd). Two of top 5 US refineries within 25 miles — global unique density. On the limitation side, radiation hazard — exclusion zones up to 200+ ft — local crews mitigate by procedure-level controls and UT/PAUT (for laminar flaws) where the indication class warrants it.
The Beaumont, TX certification economy is built around Sabine-Neches ASNT Section, AWS Sabine Section, and a local API exam centre. Inspectors targeting RT work clear roughly 720 training hours to Level II, then layer AWS CWI and API tickets to qualify into the refining programmes that anchor local demand. Vendor-led training paths feed most of the local pipeline; apprenticeship routes carry the rest.
- ASNT chapter: Sabine-Neches ASNT Section
- AWS section: AWS Sabine Section
- API exam centre: hosted locally
How much does RT cost in Beaumont, TX?
RT (Radiographic Testing) day-rates in Beaumont, TX typically clear at $801/day for Level II crews, with the pricing multiplier on the national base running ×1.04 (transport surcharge band: low). Local Level II inspector wages average $81,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.
Which Beaumont, TX sites use RT most often?
ExxonMobil Beaumont Refinery (632k bpd) and Motiva Port Arthur Refinery (630k bpd) — largest in N. America are the high-volume RT buyers in Beaumont, TX. The refinery footprint at ExxonMobil Beaumont Refinery is a recurring RT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.
What credentials do RT inspectors need to work in Beaumont, TX?
Working RT scope in Beaumont, TX requires ASNT Level II for the method (roughly 720 total training hours to qualify), plus Sabine-Neches ASNT Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. An API exam centre is hosted in Beaumont, TX itself.
What refining failure modes does RT screen for in Beaumont, TX?
On refining jobs in Beaumont, TX, RT is most often called for Butt-weld inspection on pipe and plate screening. Recurring scope on fitness-for-service cycles drives the volume. The technique sits inside TPSC §757.001's acceptance framework, and local crews build inspection plans around the failure modes the refining owners audit hardest.
How fast can a RT crew mobilise in Beaumont, TX?
Routine RT scope in Beaumont, TX typically picks up a certified crew within 24–72 hours of posting a request — the deep contractor base around ExxonMobil Beaumont Refinery (632k bpd) keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Beaumont, TX sites.
What standards govern RT acceptance in Beaumont, TX?
RT examinations in Beaumont, TX reference BPVC Sec V Art. 2 (RT) / BPVC Sec VIII Div 1 UW-51 as the technical floor and TPSC §757.001, TCEQ for documentary compliance. ExxonMobil Beaumont Refinery (632k bpd)'s qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.
Ready for RT inspection in Beaumont?
Connect with certified RT providers in Beaumont. Parallel quotes, traceable calibration, audit-grade records.
Get a free quote todayOther NDT methods in Beaumont
Ultrasonic Testing
UT
High-frequency sound-wave inspection for wall thickness, weld integrity and internal flaw detection.
Magnetic Particle Testing
MT
Surface and near-surface crack detection on ferromagnetic materials via magnetic flux leakage.
Liquid Penetrant Testing
PT
Capillary-action surface flaw detection on any non-porous material using dye or fluorescent penetrant.
Visual Testing
VT
Code-required direct or remote visual examination of as-fabricated and in-service surfaces.
Radiographic Testing in nearby cities
Verified Beaumont, TX Inspection-Market Data
Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Beaumont, TX's actual NDT market, not a generic template.
- Local Wage Anchor — Level II NDT Technician
- $81K/yr typical for Beaumont, TX
- Metro Industrial Base
- 399K people in Beaumont-Port Arthur MSA
- Sector Mix (NDT Demand Drivers)
- Refining (42%) · Petrochemical (22%) · Pipelines / Midstream (16%)
- Refinery Inventory
- 3+ refineries · ~1.5M bpd combined capacity — ExxonMobil Beaumont Refinery, Motiva Port Arthur, TotalEnergies Port Arthur
- Port / Marine Workload
- Port of Beaumont (94M tons (military + dry bulk #1 strategic port))
- Active API-Certified Inspectors (regional)
- ~380 API 510 · ~450 API 570 · ~240 API 653
- ASNT Chapter / Community
- Sabine-Neches ASNT Section
- Cost-of-Living Impact on Rate Cards
- COL index 88.2 (11.8 pts below national avg) · transport surcharge band: low
Source: BLS OES May 2024 Beaumont-Port Arthur MSA
Source: US Census ACS 2023
Source: BEA Regional Accounts 2023
Source: EIA Refinery Capacity Report Jan 2025
Source: AAPA US Port Rankings 2023
Source: API ICP roster + state directories (est.)
Source: ASNT chapter directory
Source: C2ER ACCRA COL Index 2024
Continue Reading — In-Depth Guides
Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.
- Radiographic Testing — Complete GuideSources, exposure, IQIs, ASME V, digital RT.
- Radiographic Testing MethodMethod-level overview, sources, films, sensors.
- How to Interpret Radiograph Weld DefectsIdentify slag, porosity, LOF on RT film.
- NDT Inspector Salary Guide [2026]US pay by certification level, method & industry — and how to earn more.
- NDT Inspection Cost Index [2026]US inspection rates by method & region, and what moves the price.
Join NDT Connect — free
Need Radiographic Testing in Beaumont, or an inspector who offers it? Join NDT Connect free.
Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers
