JIS Z 2345: Ultrasonic Testing Equipment
Japanese standard for ultrasonic testing equipment specifications and requirements.
JIS (Japanese Industrial Standards) maintains JIS Z 2345 as a published consensus standard used across the NDT industry.
JIS Z 2345 becomes enforceable when invoked by a contract, regulatory citation, or another standard that references it as the controlling document.
JIS Z 2345 is invoked when the scope of work matches its title — ultrasonic testing equipment — and when the contract or regulatory regime cites it as the controlling document.
Methods covered
Industries
- All Industries
- Personnel qualification: examinations under JIS Z 2345 must be performed by inspectors qualified and certified to a recognised scheme (typically ASNT SNT-TC-1A, CP-189, or ISO 9712 depending on jurisdiction), with documented training hours, vision tests, and a controlling written practice.
- Written procedure: every examination requires a written, controlled procedure that names the method, equipment, calibration steps, scanning pattern, and acceptance criteria — and is qualified before first use.
- Equipment verification: ultrasonic instruments must be verified against a calibration block (V1, V2, IIW, or job-specific reference) at intervals defined by the procedure — typically before use, every four hours of scanning, on operator change, and at end of shift.
- Acceptance criteria: indications are evaluated against the standard's tabulated limits (length, depth, alignment, frequency); any indication exceeding the criteria is recorded, dispositioned, and either repaired or evaluated for fitness-for-service.
- Documentation: examination reports must include enough information for a third party to reproduce the inspection — equipment serial numbers, calibration records, inspector ID, sketches of indications, and the controlling procedure revision.
JIS Z 2345 is maintained on its publishing organisation's revision cycle. The version cited in any contract or written inspection program should be tracked so that revisions can be reviewed against the existing inspection plan and any clause changes worked into the next procedure update.
On a typical All Industries job, JIS Z 2345 is reproduced inside the inspection company's written procedure, the procedure is qualified for the customer, and each examination report cites the procedure revision back to the controlling clause of the standard.
What does JIS Z 2345 cover?
JIS Z 2345 (Ultrasonic Testing Equipment) is published by JIS (Japanese Industrial Standards). Japanese standard for ultrasonic testing equipment specifications and requirements..
Is JIS Z 2345 mandatory or voluntary?
JIS Z 2345 is a consensus standard. It becomes mandatory when invoked by a contract, by another code that cites it (for example ASME Section V calling out an ASTM practice), or by a regulator that has adopted it into law in a specific jurisdiction.
Who is qualified to perform inspections under JIS Z 2345?
Inspections under JIS Z 2345 must be performed by personnel qualified and certified to a recognised NDT certification scheme — most commonly ASNT SNT-TC-1A or CP-189 in the United States, ISO 9712 in much of the rest of the world, and NAS 410 for aerospace work. The written practice that controls qualification must be in place before any examination is started.
Which other standards are commonly cited alongside JIS Z 2345?
JIS Z 2345 is most often cited together with the parent code that brings it into the contract — typically ASME Section V or VIII for U.S. pressure equipment, AWS D1.1 for structural welding, API 510/570/653 for in-service petroleum equipment, or the matching EN/ISO standard for European and international work.
Standard Code
JIS Z 2345
Organization
JIS (Japanese Industrial Standards)
Methods Covered
1 method(s)
Industries
1 sector(s)
Need clarification on NDT terminology used in JIS Z 2345?
Browse NDT Glossary