Radiographic Testing in Stavanger
Ionising-radiation imaging (X-ray or gamma) of internal weld structure on film or digital detector.
PSA Norway audits NDT records at the asset and corporate level simultaneously — Equinor and partner contractors run NORSOK-grade traceability where a cal-record gap reads as a safety-case deficiency.
How Radiographic Testing works
A radiation source (X-ray tube, Ir-192 or Co-60) projects through the test piece onto a film or DDA. Differential absorption maps internal density variations — porosity, slag, cracks, lack of fusion — onto the recorded image.
RT in Stavanger
Radiographic Testing in Stavanger is most often pulled into scope when north sea offshore oil and gas or subsea operators need PSA Norway (Petroleumstilsynet)-grade evidence that an asset is fit for continued service. The recurring sites — Equinor Forus HQ and Aker Solutions Stavanger — write RT into pre-job inspection plans because ionising-radiation imaging (x-ray or gamma) of internal weld structure on film or digital detector. Local contractors mobilise calibrated equipment, current ASNT Level II / III credentials, and procedure packages tied to ASME Section V and ASTM E94.
Quick facts
- Method: RT — Radiographic Testing
- Service area: Stavanger, NO
- Primary industries: North Sea offshore oil and gas, Subsea
- Key standards: ASME Section V, ASTM E94
Where RT shows up on Stavanger jobs
Industry relevance
North Sea offshore oil and gas and Subsea operators in Stavanger pull RT into routine and turnaround scopes. The named recurring sites include Equinor Forus HQ and Aker Solutions Stavanger.
Acceptance criteria are written against PSA Norway (Petroleumstilsynet) and ratified at Level III sign-off for procedure qualification.
Compliance and safety
Radiographic Testing inspections in Stavanger reference ASME Section V, ASTM E94, ASTM E1032. Site-specific qualification matrices add operator-specific requirements on top.
Working with NDT Connect-listed providers ensures Level II/III currency, instrument-level calibration traceability, and digital record packages that survive audit retention demands.
Named Stavanger facilities served
Radiographic Testing scopes in Stavanger recur at the following operators and sites. Local contractors are pre-qualified at most of these gates.
Equinor Forus HQ
Integrated energy HQ — RT scope routine
Aker Solutions Stavanger
Subsea / offshore engineering — RT scope routine
Aker BP Stavanger
Offshore operator — RT scope routine
Applicable standards and codes
Radiographic Testing inspections in Stavanger are written and accepted against:
ASME Section V
ASTM E94
ASTM E1032
ISO 17636
API 1104
Local code authorities
Why RT is chosen
Permanent imaging record for audit retention
Excellent at volumetric defects (porosity, inclusions)
Less operator-dependent than UT
Typical applications
- •Pipeline girth-weld inspection per API 1104
- •Pressure-vessel longitudinal and circumferential welds per ASME Section VIII
- •Casting volumetric inspection on safety-critical components
- •Corrosion-under-insulation profile imaging
The NDT footprint in Stavanger, Norway reflects offshore oil & gas's share of the local economy and the supporting subsea engineering cluster. PSA's Sikkerhetsforum (Safety Forum) drives industry-wide NDT standards. Radiographic Testing (RT) sits inside the recurring scope mix that Equinor (HQ), Mongstad Refinery (regional), and the broader north sea operator base put on contract every cycle.
a compact metro of around 243K residents keeps the certified-contractor base deep enough to absorb drill-pipe API 5DP inspection surges without losing schedule. Programmes typically rotate around drill pipe populations, and RT is the examination most often written into the procedure pack at the gate.
NORSOK M-101 is the dominant fabrication code — replaces ASME for Norwegian sector. Cost-of-living index 132 and the medium transport surcharge band combine into the multiplier procurement teams budget against.
Code compliance on RT work in Stavanger, Norway starts with the local authority stack — PSA Norway regulations, NORSOK standards (M-101, M-501), DNV-OS-F101 (offshore pipelines), NORSOK D-010 (well integrity). BPVC Sec V Art. 2 (RT) is the method-level technical standard procedures qualify against, with API 5CT, BPVC Sec VIII Div 1 UW-51 and B31.3 para 344.5 pulled in when scope crosses into offshore oil & gas territory. Equinor (HQ) typically requires currency on both layers before a contractor crosses the gate.
- PSA Norway regulations
- NORSOK standards (M-101, M-501)
- DNV-OS-F101 (offshore pipelines)
- BPVC Sec V Art. 2 (RT)
- BPVC Sec VIII Div 1 UW-51
- B31.3 para 344.5
Radiographic Testing (RT) day-rates in Stavanger, Norway cluster between $763–$1132 for Level II crews, with a typical mid-point near $948. The medium transport-surcharge band and a cost-of-living index of 132 push rates above the national baseline (multiplier ×1.23). Local Level II inspector wages — $95,000 median per BLS — anchor that band. Outage windows add 25–40%; volume programmes negotiate 8–15% off.
| Line item | Rate | Detail |
|---|---|---|
| Hourly labour (Level II) | $95–$141/hr | standard programme rate |
| Hourly labour (Level III) | $188/hr | procedure qualification + disposition |
| Day rate (Level II) | $948/day | 8 hours, ≤30 km from base |
| Equipment surcharge | $344/day | instrument + consumables |
| Mobilisation | $525/trip | medium transport-surcharge band |
| Outage / night-shift uplift | +25–40% | turnaround windows and weekend work |
Effective multiplier vs national base: ×1.23 · transport surcharge band: medium.
Certified RT providers in Stavanger, Norway typically serve a client base anchored by Equinor (HQ), Aker BP, and other north sea operators. Posting a scope through NDT Connect routes the request to providers already pre-qualified at these gates — three to five parallel quotes typically return within 24–72 hours.
Major regional clients served
- Equinor (HQ)
- Aker BP
- ConocoPhillips Norway
- TotalEnergies Norway
- Aker Solutions
RT's role in Stavanger, Norway's inspection economy is anchored to offshore oil & gas: Equinor HQ; Norwegian sector NCS operations. The technique earns its keep on aerospace casting and forging inspection, and local pre-job plans often centre on casing string populations where fatigue crack at drill-pipe upset have to be screened out before return-to-service.
On the ground, that translates to drill-collar fatigue MPI as the dominant scope, with drill-pipe API 5DP inspection surges layered on every cycle. Equinor (HQ) typically locks in standing-order coverage; smaller operators time spot-buys against contractor availability. The local pace — measured in realistic shift throughput — is what sets contractor utilisation and, downstream, the rate band procurement should expect.
PSA's Sikkerhetsforum (Safety Forum) drives industry-wide NDT standards. NORSOK M-101 is the dominant fabrication code — replaces ASME for Norwegian sector. On the limitation side, radiation hazard — exclusion zones up to 200+ ft — local crews mitigate by procedure-level controls and UT/PAUT (for laminar flaws) where the indication class warrants it.
The Stavanger, Norway certification economy is built around DnV NDT certification network (Norwegian), Norsk Sveiseteknisk Forbund (NSF), and regional API exam access. Inspectors targeting RT work clear roughly 720 training hours to Level II, then layer AWS CWI and API tickets to qualify into the offshore oil & gas programmes that anchor local demand. Vendor-led training paths feed most of the local pipeline; apprenticeship routes carry the rest.
- ASNT chapter: DnV NDT certification network (Norwegian)
- AWS section: Norsk Sveiseteknisk Forbund (NSF)
- API exam centre: access via nearest regional centre
How much does RT cost in Stavanger, Norway?
RT (Radiographic Testing) day-rates in Stavanger, Norway typically clear at $947/day for Level II crews, with the pricing multiplier on the national base running ×1.23 (transport surcharge band: medium). Local Level II inspector wages average $95,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.
Which Stavanger, Norway sites use RT most often?
Equinor (HQ) and Aker BP are the high-volume RT buyers in Stavanger, Norway. The refinery footprint at Mongstad Refinery (regional) is a recurring RT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.
What credentials do RT inspectors need to work in Stavanger, Norway?
Working RT scope in Stavanger, Norway requires ASNT Level II for the method (roughly 720 total training hours to qualify), plus DnV NDT certification network (Norwegian) membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. API exam logistics route through the nearest regional centre.
What offshore oil & gas failure modes does RT screen for in Stavanger, Norway?
On offshore oil & gas jobs in Stavanger, Norway, RT is most often called for sulfide stress cracking screening. Recurring scope on drill-pipe API 5DP inspection cycles drives the volume. The technique sits inside PSA Norway regulations's acceptance framework, and local crews build inspection plans around the failure modes the offshore oil & gas owners audit hardest.
How fast can a RT crew mobilise in Stavanger, Norway?
Routine RT scope in Stavanger, Norway typically picks up a certified crew within 24–72 hours of posting a request — the deep contractor base around Equinor (HQ) keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Stavanger, Norway sites.
What standards govern RT acceptance in Stavanger, Norway?
RT examinations in Stavanger, Norway reference BPVC Sec V Art. 2 (RT) / BPVC Sec VIII Div 1 UW-51 as the technical floor and PSA Norway regulations, NORSOK standards (M-101, M-501) for documentary compliance. Equinor (HQ)'s qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.
Ready for RT inspection in Stavanger?
Connect with certified RT providers in Stavanger. Parallel quotes, traceable calibration, audit-grade records.
Get a free quote todayOther NDT methods in Stavanger
Ultrasonic Testing
UT
High-frequency sound-wave inspection for wall thickness, weld integrity and internal flaw detection.
Magnetic Particle Testing
MT
Surface and near-surface crack detection on ferromagnetic materials via magnetic flux leakage.
Liquid Penetrant Testing
PT
Capillary-action surface flaw detection on any non-porous material using dye or fluorescent penetrant.
Visual Testing
VT
Code-required direct or remote visual examination of as-fabricated and in-service surfaces.
Radiographic Testing in nearby cities
Verified Stavanger, Norway Inspection-Market Data
Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Stavanger, Norway's actual NDT market, not a generic template.
- Local Wage Anchor — Level II NDT Technician
- $95K/yr typical for Stavanger, Norway
- Metro Industrial Base
- 243K people in Stavanger, Norway
- Sector Mix (NDT Demand Drivers)
- Offshore Oil & Gas (55%) · Subsea Engineering (20%) · Floating Production (12%)
- Refinery Inventory
- 1+ refineries — Mongstad Refinery (regional)
- Port / Marine Workload
- Risavika Industrial Port
- Active API-Certified Inspectors (regional)
- ~40 API 510 · ~50 API 570 · ~30 API 653
- ASNT Chapter / Community
- DnV NDT certification network (Norwegian)
- Cost-of-Living Impact on Rate Cards
- COL index 132.0 (32.0 pts above national avg) · transport surcharge band: medium
Source: SSB Norway 2024 (high cost-of-living premium)
Source: US Census ACS 2023
Source: BEA Regional Accounts 2023
Source: EIA Refinery Capacity Report Jan 2025
Source: AAPA US Port Rankings 2023
Source: API ICP roster + state directories (est.)
Source: ASNT chapter directory
Source: C2ER ACCRA COL Index 2024
Continue Reading — In-Depth Guides
Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.
- Radiographic Testing — Complete GuideSources, exposure, IQIs, ASME V, digital RT.
- Radiographic Testing MethodMethod-level overview, sources, films, sensors.
- How to Interpret Radiograph Weld DefectsIdentify slag, porosity, LOF on RT film.
- NDT Inspector Salary Guide [2026]US pay by certification level, method & industry — and how to earn more.
- NDT Inspection Cost Index [2026]US inspection rates by method & region, and what moves the price.
Join NDT Connect — free
Need Radiographic Testing in Stavanger, or an inspector who offers it? Join NDT Connect free.
Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers
