Skip to content
NDT Connect Logo
RT services in Macon, GA

Radiographic Testing in Macon

Ionising-radiation imaging (X-ray or gamma) of internal weld structure on film or digital detector.

WR-ALC depot-level MRO at Robins runs to MIL-STD-2219 weld specs and NAS 410 cert paths — every contractor NDT roster has to map both at audit.
3
Local industries
2+
Named facilities
T3
Labour band
3
Code authorities

How Radiographic Testing works

A radiation source (X-ray tube, Ir-192 or Co-60) projects through the test piece onto a film or DDA. Differential absorption maps internal density variations — porosity, slag, cracks, lack of fusion — onto the recorded image.

RT in Macon

Radiographic Testing in Macon is most often pulled into scope when aerospace mro (robins afb) or manufacturing operators need FAA Part 145-grade evidence that an asset is fit for continued service. The recurring sites — Robins Air Force Base / WR-ALC and Georgia Power Plant Scherer (regional) — write RT into pre-job inspection plans because ionising-radiation imaging (x-ray or gamma) of internal weld structure on film or digital detector. Local contractors mobilise calibrated equipment, current ASNT Level II / III credentials, and procedure packages tied to ASME Section V and ASTM E94.

Quick facts

  • Method: RT Radiographic Testing
  • Service area: Macon, GA
  • Primary industries: Aerospace MRO (Robins AFB), Manufacturing
  • Key standards: ASME Section V, ASTM E94

Where RT shows up on Macon jobs

Industry relevance

Aerospace MRO (Robins AFB) and Manufacturing operators in Macon pull RT into routine and turnaround scopes. The named recurring sites include Robins Air Force Base / WR-ALC and Georgia Power Plant Scherer (regional).

Acceptance criteria are written against FAA Part 145 and ratified at Level III sign-off for procedure qualification.

Compliance and safety

Radiographic Testing inspections in Macon reference ASME Section V, ASTM E94, ASTM E1032. Site-specific qualification matrices add operator-specific requirements on top.

Working with NDT Connect-listed providers ensures Level II/III currency, instrument-level calibration traceability, and digital record packages that survive audit retention demands.

Named Macon facilities served

Radiographic Testing scopes in Macon recur at the following operators and sites. Local contractors are pre-qualified at most of these gates.

Robins Air Force Base / WR-ALC

USAF depot MRORT scope routine

Georgia Power Plant Scherer (regional)

Coal power plantRT scope routine

Applicable standards and codes

Radiographic Testing inspections in Macon are written and accepted against:

ASME Section V

ASTM E94

ASTM E1032

ISO 17636

API 1104

Local code authorities

FAA Part 145
NAS 410
MIL-STD

Why RT is chosen

  • Permanent imaging record for audit retention

  • Excellent at volumetric defects (porosity, inclusions)

  • Less operator-dependent than UT

Typical applications

  • Pipeline girth-weld inspection per API 1104
  • Pressure-vessel longitudinal and circumferential welds per ASME Section VIII
  • Casting volumetric inspection on safety-critical components
  • Corrosion-under-insulation profile imaging
Local market overview — Macon, GA

Macon, GA runs a compact NDT economy that pivots around aerospace mro (robins afb) (45% of the local industrial base) and manufacturing, with secondary load from power generation. Aerospace MRO (Robins AFB) is a core industrial driver of NDT demand in Macon. feeds the RT workload that defines this market — a compact metro of around 235K residents sustains a contractor pool calibrated to that demand cadence.

Anchor employers like Robins Air Force Base / WR-ALC and Robins Air Force Base / WR-ALC write Radiographic Testing into recurring scope packages. NAS 410 certification cycles dominate the calendar — pre-qualification at Robins Air Force Base / WR-ALC alone unlocks the volume backbone of the Macon, GA RT contractor base. WR-ALC depot MRO runs to MIL-STD-2219 weld specs and NAS 410 cert paths.

Local Level II inspector wages run roughly $62,000/year per BLS, anchoring the day-rate band that providers quote in Macon, GA against a cost-of-living index of 84. Spring TARs (Apr-May) compresses the calendar; spot-buy crews cover the surge. RT is consistently among the methods most often written into procedure packs at the city's anchor sites.

Regional code context — RT in Macon, GA

Acceptance criteria for RT in the southeast corridor lean on BPVC Sec V Art. 2 (RT) as the technical floor and on FAA Part 145 / NAS 410 for documentary survival. Industry-specific: AS9100 is the cross-reference the procedure must close on. Owners audit the calibration trail and Level III sign-off on every recurring scope, and Robins Air Force Base / WR-ALC runs its own qualification matrix on top.

  • FAA Part 145
  • NAS 410
  • MIL-STD
  • BPVC Sec V Art. 2 (RT)
  • BPVC Sec VIII Div 1 UW-51
  • B31.3 para 344.5
Local pricing breakdown — RT in Macon, GA

Procurement-grade rates for RT in Macon, GA: $589–$874/day Level II, $1164/day Level III. BLS reports median Level II inspector wages of $62,000 for the Macon, GA MSA — the day-rate covers wage plus equipment, mobilisation, calibration overhead, and contractor margin. Transport surcharge: medium. Effective multiplier vs national base: ×0.95.

Line itemRateDetail
Hourly labour (Level II)$74–$109/hrstandard programme rate
Hourly labour (Level III)$146/hrprocedure qualification + disposition
Day rate (Level II)$732/day8 hours, ≤30 km from base
Equipment surcharge$266/dayinstrument + consumables
Mobilisation$525/tripmedium transport-surcharge band
Outage / night-shift uplift+25–40%turnaround windows and weekend work

Effective multiplier vs national base: ×0.95 · transport surcharge band: medium.

Top local providers — RT in Macon, GA

Active RT providers serving Macon, GA hold pre-qualification packages for Robins Air Force Base / WR-ALC and Georgia Power (Plant Scherer) as table stakes. The directory filters by Level II/III currency, RT-specific procedure history, and instrument calibration date — letting buyers shortlist crews who can mobilise without a fresh onboarding cycle.

Major regional clients served

  • Robins Air Force Base / WR-ALC
  • Georgia Power (Plant Scherer)
  • Tyson Foods
  • YKK
  • Kumho Tire
Find RT providers in Macon, GA
RT in Macon, GA — local applications

Radiographic Testing (RT) in Macon, GA is most often pulled into scope when aerospace mro (robins afb) operators need to qualify landing-gear forging against FAA Part 145. The technique is the default examination for butt-weld inspection on pipe and plate — and on Macon, GA jobs, the use case typically narrows to NAS 410 certification where corrosion under sealant is the failure mechanism owners are screening for.

The dominant scope here is wing-skin TWA inspection. Robins Air Force Base / WR-ALC writes RT into the procedure pack on every cycle, and the local crews who run this scope daily have built the calibration libraries, scan plans, and reporting templates that Macon, GA owners have come to expect. WR-ALC depot MRO runs to MIL-STD-2219 weld specs and NAS 410 cert paths. Procedures cite BPVC Sec V Art. 2 (RT); deliverables ship as Radiograph (film or DICONDE digital) with Level II/III written disposition.

Worth flagging: radiation hazard — exclusion zones up to 200+ ft. Macon, GA crews work around this with paired methods (typically UT/PAUT (for laminar flaws) as a crosscheck) and procedure-level mitigations — plant scherer, the largest us coal plant, adds high-temperature power-gen scope. Robins Air Force Base / WR-ALC's site-specific qualification matrix layers an additional acceptance gate on top, so contractors who already hold the RT pre-qual win the bid before rate negotiation even starts.

Local certification path — Macon, GA

ASNT Southeast Section anchors RT certification in Macon, GA; AWS Southeast Section handles welding-inspector credentials. Practical experience requirement is roughly 720 total hours to Level II — typically split between vendor classroom time at a regional training provider and supervised on-the-job hours at Robins Air Force Base / WR-ALC. API exam access is regional; the aerospace mro (robins afb) operators here generally require currency on all three credential tracks.

  • ASNT chapter: ASNT Southeast Section
  • AWS section: AWS Southeast Section
  • API exam centre: access via nearest regional centre
RT in Macon, GA — frequently asked questions
How much does RT cost in Macon, GA?

RT (Radiographic Testing) day-rates in Macon, GA typically clear at $732/day for Level II crews, with the pricing multiplier on the national base running ×0.95 (transport surcharge band: medium). Local Level II inspector wages average $62,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.

Which Macon, GA sites use RT most often?

Robins Air Force Base / WR-ALC and Georgia Power (Plant Scherer) are the high-volume RT buyers in Macon, GA. The usaf depot mro footprint at Robins Air Force Base / WR-ALC is a recurring RT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.

What credentials do RT inspectors need to work in Macon, GA?

Working RT scope in Macon, GA requires ASNT Level II for the method (roughly 720 total training hours to qualify), plus ASNT Southeast Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. API exam logistics route through the nearest regional centre.

What aerospace mro (robins afb) failure modes does RT screen for in Macon, GA?

On aerospace mro (robins afb) jobs in Macon, GA, RT is most often called for composite delamination after impact screening. Recurring scope on NAS 410 certification cycles drives the volume. The technique sits inside FAA Part 145's acceptance framework, and local crews build inspection plans around the failure modes the aerospace mro (robins afb) owners audit hardest.

How fast can a RT crew mobilise in Macon, GA?

Routine RT scope in Macon, GA typically picks up a certified crew within 24–72 hours of posting a request — the established contractor base around Robins Air Force Base / WR-ALC keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Macon, GA sites.

What standards govern RT acceptance in Macon, GA?

RT examinations in Macon, GA reference BPVC Sec V Art. 2 (RT) / BPVC Sec VIII Div 1 UW-51 as the technical floor and FAA Part 145, NAS 410 for documentary compliance. Robins Air Force Base / WR-ALC's qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.

Ready for RT inspection in Macon?

Connect with certified RT providers in Macon. Parallel quotes, traceable calibration, audit-grade records.

Get a free quote today

Other NDT methods in Macon

Radiographic Testing in nearby cities

Verified Macon, GA Inspection-Market Data

Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Macon, GA's actual NDT market, not a generic template.

Local Wage Anchor — Level II NDT Technician
$62K/yr typical for Macon, GA

Source: BLS OES May 2024 metro tables (NDT inspector proxy occupations)

Metro Industrial Base
235K people in Macon, GA

Source: US Census ACS 2023

Sector Mix (NDT Demand Drivers)
Aerospace MRO (Robins AFB) (45%) · Manufacturing (32%) · Power generation (23%)

Source: BEA Regional Accounts 2023

ASNT Chapter / Community
ASNT Southeast Section

Source: ASNT chapter directory

Cost-of-Living Impact on Rate Cards
COL index 84.0 (16.0 pts below national avg) · transport surcharge band: medium

Source: C2ER ACCRA COL Index 2024

Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.

Join NDT Connect — free

Need Radiographic Testing in Macon, or an inspector who offers it? Join NDT Connect free.

Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers