Phased Array Ultrasonic Testing in Boston
Multi-element ultrasonic imaging with electronic beam steering for advanced weld and corrosion mapping.
GE Aviation Lynn audits subcontractor NDT records every jet-engine campaign — a single missed Level III recert removes a vendor from rotation.
How Phased Array Ultrasonic Testing works
A 16- to 128-element transducer is fired with controlled time delays to steer and focus the ultrasonic beam electronically. Sectorial (S-scan) and linear (L-scan) imaging produce real-time cross-sections; encoded scanning produces permanent digital records.
PAUT in Boston
Phased Array Ultrasonic Testing in Boston is most often pulled into scope when aerospace or biotech infrastructure operators need FAA Part 145-grade evidence that an asset is fit for continued service. The recurring sites — General Electric Aviation Lynn and BAE Systems Hingham (regional) — write PAUT into pre-job inspection plans because multi-element ultrasonic imaging with electronic beam steering for advanced weld and corrosion mapping. Local contractors mobilise calibrated equipment, current ASNT Level II / III credentials, and procedure packages tied to ASME Section V and ISO 13588.
Quick facts
- Method: PAUT — Phased Array Ultrasonic Testing
- Service area: Boston, MA
- Primary industries: Aerospace, Biotech infrastructure
- Key standards: ASME Section V, ISO 13588
Where PAUT shows up on Boston jobs
Industry relevance
Aerospace and Biotech infrastructure operators in Boston pull PAUT into routine and turnaround scopes. The named recurring sites include General Electric Aviation Lynn and BAE Systems Hingham (regional).
Acceptance criteria are written against FAA Part 145 and ratified at Level III sign-off for procedure qualification.
Compliance and safety
Phased Array Ultrasonic Testing inspections in Boston reference ASME Section V, ISO 13588, ISO 19285. Site-specific qualification matrices add operator-specific requirements on top.
Working with NDT Connect-listed providers ensures Level II/III currency, instrument-level calibration traceability, and digital record packages that survive audit retention demands.
Named Boston facilities served
Phased Array Ultrasonic Testing scopes in Boston recur at the following operators and sites. Local contractors are pre-qualified at most of these gates.
General Electric Aviation Lynn
Aerospace — PAUT scope routine
BAE Systems Hingham (regional)
Defense — PAUT scope routine
Applicable standards and codes
Phased Array Ultrasonic Testing inspections in Boston are written and accepted against:
ASME Section V
ISO 13588
ISO 19285
ASTM E2491
DNV-ST-F101
Local code authorities
Why PAUT is chosen
Permanent encoded digital record for audit retention
Higher probability of detection vs conventional UT
Replaces RT on many scopes — no radiation exclusion zone
Real-time S-scan and C-scan visualisation
Typical applications
- •Code-case substitute for RT on pipeline girth welds
- •Critical-weld inspection on pressure vessels and piping
- •Corrosion mapping with C-scan visualisation
- •Component-thickness and flaw-sizing on composites
Boston, MA hosts a mature NDT contractor ecosystem built around pharma / bio and defense / aerospace. Raytheon Technologies (HQ Tewksbury, Andover), GE Aviation Lynn (jet engines), and the wider northeast operator pool route PAUT scope through pre-qualified providers — losing a Level II credential here costs real money on outage windows.
World's #1 biotech cluster — Cambridge/Kendall Sq (Moderna, Vertex, Biogen, Pfizer). That industrial substrate is what places Boston, MA on the short list for PAUT programme contracts: inspection cadence, MA DEP oversight, and the defense-missile footprint at Raytheon Andover (Patriot) all push the PAUT day-rate above generic regional benchmarks.
Pharma cGMP campaigns brings the seasonal peak — expect crew rotation to tighten and spot-buy premiums to land at the upper bound of the published rate band. Pilgrim NPP active decommissioning — segmentation of reactor internals, RPV cutting, large component shipping require specialized NDT
MA DEP sets the documentary depth PAUT reports must reach in Boston, MA — and MA Boiler Code 522 CMR layers a second audit trail on top. The method-level reference is BPVC Sec V Art. 4 Mand. Appx IV; allied industry codes complete the stack that owners cite in the bid pack. Procedures must demonstrate currency on both before the crew is cleared at gates like Raytheon Technologies (HQ Tewksbury, Andover).
- MA DEP
- MA Boiler Code 522 CMR
- PHMSA
- BPVC Sec V Art. 4 Mand. Appx IV
- ASME Code Case 2235 (PAUT in lieu of RT)
- Code Case 2541 (corrosion mapping)
A typical PAUT bid in Boston, MA lands at $1374/day for Level II work and roughly $2010/day for Level III sign-off authority. Mobilisation surcharge runs high (band-H), with COL index 162.4 feeding the labour line. Raytheon Technologies (HQ Tewksbury, Andover) programme contracts trade volume against rate; spot-buys pay the 10–20% premium. The full multiplier resolves at ×1.34 once transport and demand-density are layered in.
| Line item | Rate | Detail |
|---|---|---|
| Hourly labour (Level II) | $142–$201/hr | standard programme rate |
| Hourly labour (Level III) | $251/hr | procedure qualification + disposition |
| Day rate (Level II) | $1374/day | 8 hours, ≤30 km from base |
| Equipment surcharge | $469/day | instrument + consumables |
| Mobilisation | $850/trip | high transport-surcharge band |
| Outage / night-shift uplift | +25–40% | turnaround windows and weekend work |
Effective multiplier vs national base: ×1.34 · transport surcharge band: high.
The Boston, MA PAUT contractor base is sized to recurring demand from Raytheon Technologies (HQ Tewksbury, Andover), GE Aviation Lynn (jet engines), General Dynamics Quincy. Provider listings on NDT Connect include current ASNT certification level, instrument calibration status, and named-site experience — replacing the email-and-spreadsheet pre-qualification dance most procurement teams still run for new vendors.
Major regional clients served
- Raytheon Technologies (HQ Tewksbury, Andover)
- GE Aviation Lynn (jet engines)
- General Dynamics Quincy
- Hanscom AFB
- Moderna
For the pharma / bio operators that dominate the Boston, MA industrial base, PAUT is the workhorse for pipeline aut on cross-country construction (per api 1104 annex). World's #1 biotech cluster — Cambridge/Kendall Sq (Moderna, Vertex, Biogen, Pfizer) means the scope is dense, repeatable, and tightly specified — with recurring asset populations driving volume.
Local crews run PAUT packages calibrated for the failure modes that matter most here, deliver S-scan/L-scan/C-scan images, and close the disposition against MA DEP. Programme work accounts for the bulk of billable hours; outage cycles drive the seasonal peaks. BPVC Sec V Art. 4 Mand. Appx IV sign-off authority is the contractor capability that consistently wins the bid here.
World's #1 biotech cluster (Kendall Square) — bioreactor + clean-utility piping NDT to ASME BPE / FDA cGMP unique density. Raytheon Technologies (HQ Tewksbury, Andover) pre-qualifications are the gatekeeper — crews who already hold them win the volume work; new entrants run the onboarding gauntlet first. Pilgrim NPP active decommissioning — segmentation of reactor internals, RPV cutting, large component shipping require specialized NDT
Inspectors qualifying into the Boston, MA PAUT market route through Boston ASNT Section for ASNT Level II/III certification under SNT-TC-1A or CP-189. Total Level II training time for PAUT runs roughly 1280 hours including classroom and on-the-job experience. Welding-related credentials route through AWS Boston Section for AWS CWI exam access; the city hosts an API exam centre for 510/570/653 testing. Prerequisite per ASNT: ut level ii current.
- ASNT chapter: Boston ASNT Section
- AWS section: AWS Boston Section
- API exam centre: hosted locally
How much does PAUT cost in Boston, MA?
PAUT (Phased Array Ultrasonic Testing) day-rates in Boston, MA typically clear at $1374/day for Level II crews, with the pricing multiplier on the national base running ×1.34 (transport surcharge band: high). Local Level II inspector wages average $95,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.
Which Boston, MA sites use PAUT most often?
Raytheon Technologies (HQ Tewksbury, Andover) and GE Aviation Lynn (jet engines) are the high-volume PAUT buyers in Boston, MA. The defense-missile footprint at Raytheon Andover (Patriot) is a recurring PAUT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.
What credentials do PAUT inspectors need to work in Boston, MA?
Working PAUT scope in Boston, MA requires ASNT Level II for the method (roughly 1280 total training hours to qualify), plus Boston ASNT Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. An API exam centre is hosted in Boston, MA itself.
What pharma / bio failure modes does PAUT screen for in Boston, MA?
On pharma / bio jobs in Boston, MA, PAUT is most often called for Code-replacement for RT on heavy-wall pipe and pressure vessel welds (per ASME Code Case 2235) screening. Recurring programme cycles drive the volume. The technique sits inside MA DEP's acceptance framework, and local crews build inspection plans around the failure modes the pharma / bio owners audit hardest.
How fast can a PAUT crew mobilise in Boston, MA?
Routine PAUT scope in Boston, MA typically picks up a certified crew within 24–72 hours of posting a request — the deep contractor base around Raytheon Technologies (HQ Tewksbury, Andover) keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Boston, MA sites.
What standards govern PAUT acceptance in Boston, MA?
PAUT examinations in Boston, MA reference BPVC Sec V Art. 4 Mand. Appx IV / ASME Code Case 2235 (PAUT in lieu of RT) as the technical floor and MA DEP, MA Boiler Code 522 CMR for documentary compliance. Raytheon Technologies (HQ Tewksbury, Andover)'s qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.
Ready for PAUT inspection in Boston?
Connect with certified PAUT providers in Boston. Parallel quotes, traceable calibration, audit-grade records.
Get a free quote todayOther NDT methods in Boston
Ultrasonic Testing
UT
High-frequency sound-wave inspection for wall thickness, weld integrity and internal flaw detection.
Radiographic Testing
RT
Ionising-radiation imaging (X-ray or gamma) of internal weld structure on film or digital detector.
Magnetic Particle Testing
MT
Surface and near-surface crack detection on ferromagnetic materials via magnetic flux leakage.
Liquid Penetrant Testing
PT
Capillary-action surface flaw detection on any non-porous material using dye or fluorescent penetrant.
Phased Array Ultrasonic Testing in nearby cities
Verified Boston, MA Inspection-Market Data
Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Boston, MA's actual NDT market, not a generic template.
- Local Wage Anchor — PAUT Specialist
- $124K/yr typical for Boston, MA
- Metro Industrial Base
- 4.9M people in Boston-Cambridge-Newton MSA
- Sector Mix (NDT Demand Drivers)
- Pharma / Bio (22%) · Defense / Aerospace (18%) · Naval Shipyards (10%)
- Active API-Certified Inspectors (regional)
- ~90 API 510 · ~140 API 570 · ~90 API 653
- ASNT Chapter / Community
- Boston ASNT Section
- Cost-of-Living Impact on Rate Cards
- COL index 162.4 (62.4 pts above national avg) · transport surcharge band: high
Source: BLS OES May 2024 Boston-Cambridge-Newton MSA
Source: US Census ACS 2023
Source: BEA Regional Accounts 2023
Source: API ICP roster + state directories (est.)
Source: ASNT chapter directory
Source: C2ER ACCRA COL Index 2024
Continue Reading — In-Depth Guides
Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.
- Phased Array UT (PAUT) — Complete GuideBeam steering, focal laws, scan plans, ISO 13588.
- Phased Array UT MethodMethod-level PAUT page — beam control & probes.
- NDT Inspection Cost Index [2026]US inspection rates by method & region, and what moves the price.
- Ultrasonic Testing — Complete GuidePhysics, calibration, codes, equipment, applications.
- Ultrasonic Testing MethodMethod-level overview, equipment, standards.
Join NDT Connect — free
Need Phased Array Ultrasonic Testing in Boston, or an inspector who offers it? Join NDT Connect free.
Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers
