NDT inspection cost in Tampa: Radiographic Testing rates
Field-anchored pricing guide for RT (Radiographic Testing) and the other five common NDT methods in Tampa, FL. Rates are quoted in USD per hour and reflect the Tier-1 labour band that applies across southeast markets.
Phosphate fertilizer plants run continuous-process operations — calibration intervals on PT and MT consumables compress under high-cycle workloads.
Low band
$472
per hour · routine scope, full-day crew
Typical
$826
per hour · most jobs land here
High band
$1416
per hour · turnaround / night shift / rope access
The NDT footprint in Tampa, FL reflects port operations's share of the local economy and the supporting defense cluster. Mosaic Bone Valley — world's largest phosphate complex; phosphoric acid plants + sulfuric acid towers require unique corrosion-resistant alloy NDT (titanium UT, NACE). Radiographic Testing (RT) sits inside the recurring scope mix that MacDill AFB (CENTCOM, SOCOM), Port Tampa Bay, and the broader southeast operator base put on contract every cycle.
a top-tier metro of roughly 3.3 million keeps the certified-contractor base deep enough to absorb jetty sheet-pile UT surges without losing schedule. Programmes typically rotate around mooring bollard populations, and RT is the examination most often written into the procedure pack at the gate.
MacDill AFB — KC-135 + KC-46 tanker hub; aerial refueling boom + airframe NDT (cleared work). Cost-of-living index 102.5 and the medium transport surcharge band combine into the multiplier procurement teams budget against.
Code compliance on RT work in Tampa, FL starts with the local authority stack — FL DEP, FL Boiler Code F.S. 554, PHMSA, USCG Sector St. Petersburg, DoD (MacDill), MSHA (Mosaic). BPVC Sec V Art. 2 (RT) is the method-level technical standard procedures qualify against, with AWS D1.1, BPVC Sec VIII Div 1 UW-51 and B31.3 para 344.5 pulled in when scope crosses into port operations territory. MacDill AFB (CENTCOM, SOCOM) typically requires currency on both layers before a contractor crosses the gate.
- FL DEP
- FL Boiler Code F.S. 554
- PHMSA
- BPVC Sec V Art. 2 (RT)
- BPVC Sec VIII Div 1 UW-51
- B31.3 para 344.5
Radiographic Testing (RT) day-rates in Tampa, FL cluster between $663–$984 for Level II crews, with a typical mid-point near $824. The medium transport-surcharge band and a cost-of-living index of 102.5 push rates above the national baseline (multiplier ×1.07). Local Level II inspector wages — $76,000 median per BLS — anchor that band. Outage windows add 25–40%; volume programmes negotiate 8–15% off.
| Line item | Rate | Detail |
|---|---|---|
| Hourly labour (Level II) | $83–$123/hr | standard programme rate |
| Hourly labour (Level III) | $164/hr | procedure qualification + disposition |
| Day rate (Level II) | $824/day | 8 hours, ≤30 km from base |
| Equipment surcharge | $300/day | instrument + consumables |
| Mobilisation | $525/trip | medium transport-surcharge band |
| Outage / night-shift uplift | +25–40% | turnaround windows and weekend work |
Effective multiplier vs national base: ×1.07 · transport surcharge band: medium.
Certified RT providers in Tampa, FL typically serve a client base anchored by MacDill AFB (CENTCOM, SOCOM), Mosaic Co (HQ), and other southeast operators. Posting a scope through NDT Connect routes the request to providers already pre-qualified at these gates — three to five parallel quotes typically return within 24–72 hours.
Major regional clients served
- MacDill AFB (CENTCOM, SOCOM)
- Mosaic Co (HQ)
- TECO Energy (HQ)
- Port Tampa Bay
- Honeywell Clearwater
RT's role in Tampa, FL's inspection economy is anchored to port operations: Port Tampa Bay — largest FL port by tonnage; sulfur, phosphate, fuel. The technique earns its keep on casting porosity, shrinkage, and inclusion detection, and local pre-job plans often centre on mooring bollard populations where fatigue at crane gusset have to be screened out before return-to-service.
On the ground, that translates to gantry crane MT/UT scope as the dominant scope, with jetty sheet-pile UT surges layered on every cycle. MacDill AFB (CENTCOM, SOCOM) typically locks in standing-order coverage; smaller operators time spot-buys against contractor availability. The local pace — measured in realistic shift throughput — is what sets contractor utilisation and, downstream, the rate band procurement should expect.
Mosaic Bone Valley — world's largest phosphate complex; phosphoric acid plants + sulfuric acid towers require unique corrosion-resistant alloy NDT (titanium UT, NACE). MacDill AFB — KC-135 + KC-46 tanker hub; aerial refueling boom + airframe NDT (cleared work). On the limitation side, radiation hazard — exclusion zones up to 200+ ft — local crews mitigate by procedure-level controls and UT/PAUT (for laminar flaws) where the indication class warrants it.
The Tampa, FL certification economy is built around Tampa Bay ASNT Section, AWS Tampa Bay Section, and a local API exam centre. Inspectors targeting RT work clear roughly 720 training hours to Level II, then layer AWS CWI and API tickets to qualify into the port operations programmes that anchor local demand. Vendor-led training paths feed most of the local pipeline; apprenticeship routes carry the rest.
- ASNT chapter: Tampa Bay ASNT Section
- AWS section: AWS Tampa Bay Section
- API exam centre: hosted locally
How much does RT cost in Tampa, FL?
RT (Radiographic Testing) day-rates in Tampa, FL typically clear at $824/day for Level II crews, with the pricing multiplier on the national base running ×1.07 (transport surcharge band: medium). Local Level II inspector wages average $76,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.
Which Tampa, FL sites use RT most often?
MacDill AFB (CENTCOM, SOCOM) and Mosaic Co (HQ) are the high-volume RT buyers in Tampa, FL. The port footprint at Port Tampa Bay is a recurring RT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.
What credentials do RT inspectors need to work in Tampa, FL?
Working RT scope in Tampa, FL requires ASNT Level II for the method (roughly 720 total training hours to qualify), plus Tampa Bay ASNT Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. An API exam centre is hosted in Tampa, FL itself.
What port operations failure modes does RT screen for in Tampa, FL?
On port operations jobs in Tampa, FL, RT is most often called for fatigue at crane gusset screening. Recurring scope on jetty sheet-pile UT cycles drives the volume. The technique sits inside FL DEP's acceptance framework, and local crews build inspection plans around the failure modes the port operations owners audit hardest.
How fast can a RT crew mobilise in Tampa, FL?
Routine RT scope in Tampa, FL typically picks up a certified crew within 24–72 hours of posting a request — the deep contractor base around MacDill AFB (CENTCOM, SOCOM) keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Tampa, FL sites.
What standards govern RT acceptance in Tampa, FL?
RT examinations in Tampa, FL reference BPVC Sec V Art. 2 (RT) / BPVC Sec VIII Div 1 UW-51 as the technical floor and FL DEP, FL Boiler Code F.S. 554 for documentary compliance. MacDill AFB (CENTCOM, SOCOM)'s qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.
Method
Radiographic Testing
Abbreviation
RT
Labour band
Tier 1 (×1.18)
Code authority
NERC
Get a quote
Post a RT scope and receive parallel quotes from certified Tampa providers.
Request a quotePricing caveat
The numbers above are field-anchored ranges, not a quote. Actual Tampa rates vary with scope, accessibility, shift, and contractor utilisation. Always solicit at least three quotes before committing programme spend.
Compare RT rates in nearby cities
Verified Tampa, FL Inspection-Market Data
Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Tampa, FL's actual NDT market, not a generic template.
- Local Wage Anchor — Level II NDT Technician
- $76K/yr typical for Tampa, FL
- Metro Industrial Base
- 3.3M people in Tampa-St. Petersburg-Clearwater MSA
- Sector Mix (NDT Demand Drivers)
- Port Operations (18%) · Power Generation (15%) · Defense (18%)
- Port / Marine Workload
- Port Tampa Bay (37M tons — largest FL port (sulfur, phosphate, petroleum))
- Active API-Certified Inspectors (regional)
- ~80 API 510 · ~120 API 570 · ~110 API 653
- ASNT Chapter / Community
- Tampa Bay ASNT Section
- Cost-of-Living Impact on Rate Cards
- COL index 102.5 (2.5 pts above national avg) · transport surcharge band: medium
Source: BLS OES May 2024 Tampa-St. Petersburg-Clearwater MSA
Source: US Census ACS 2023
Source: BEA Regional Accounts 2023
Source: AAPA US Port Rankings 2023
Source: API ICP roster + state directories (est.)
Source: ASNT chapter directory
Source: C2ER ACCRA COL Index 2024
Continue Reading — In-Depth Guides
Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.
- Radiographic Testing — Complete GuideSources, exposure, IQIs, ASME V, digital RT.
- Radiographic Testing MethodMethod-level overview, sources, films, sensors.
- How to Interpret Radiograph Weld DefectsIdentify slag, porosity, LOF on RT film.
- NDT Inspector Salary Guide [2026]US pay by certification level, method & industry — and how to earn more.
- NDT Inspection Cost Index [2026]US inspection rates by method & region, and what moves the price.
Join NDT Connect — free
Get RT inspection quotes in Tampa, or list your services — free on NDT Connect.
Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers
