NDT inspection cost in Salt Lake City: Magnetic Particle Testing rates
Field-anchored pricing guide for MT (Magnetic Particle Testing) and the other five common NDT methods in Salt Lake City, UT. Rates are quoted in USD per hour and reflect the Tier-1 labour band that applies across mountain west markets.
Wasatch-front refining clusters with aerospace MRO — NDT crews crossing both worlds need cert traceability across ASNT and FAA Part 145 systems.
Low band
$207
per hour · routine scope, full-day crew
Typical
$384
per hour · most jobs land here
High band
$649
per hour · turnaround / night shift / rope access
Inspection-services demand across Salt Lake City, UT flows out of refining, mining, and aerospace / defense. The mountain west corridor — a mid-band metro of about 1258K residents — concentrates 8 named industrial sites that MT crews mobilise to on a recurring cadence, with Marathon Salt Lake City Refinery typically holding standing-order contractor coverage.
Coker drum cycle dominates the MT order book here. 5 refineries N. Salt Lake (largest concentration in Mountain West). Combined with Northrop Grumman Magna (Sentinel ICBM build)'s capital-asset footprint, that is what makes Salt Lake City, UT a priority MT market for local providers.
Northrop Sentinel ICBM solid rocket motor — RT/CT inspection of largest US strategic deterrent program. Wages, capital-equipment depreciation, and procedure overhead all feed into the MT rate band, which clears at the regional benchmark for Level II work Procurement teams should expect aggressive negotiation on volume contracts here.
BPVC Sec V Art. 7 governs the MT examination itself. On top of that, Salt Lake City, UT contractors close the procedure against UDAQ Air Permits, UT Boiler Code R616-2, PHMSA, FAA Part 145 (Hill AFB), MSHA (Kennecott) before the first weld is shot. API 570 typically appears in the customer pack for refining market — and Hill AFB's pre-qualification process re-validates that the procedure pack is current at every onboarding.
- UDAQ Air Permits
- UT Boiler Code R616-2
- PHMSA
- BPVC Sec V Art. 7
- BPVC Sec VIII Div 1 Appx 6
- B31.3 para 344.3
Field-anchored MT pricing in Salt Lake City, UT runs $621/day at the typical Level II point, scaling to $1090/day for Level III procedural sign-off. The mountain west demand profile, COL index 105.2, and medium transport band combine into a ×1.09 multiplier on the national base ($460–$680/day). Hill AFB sets the high water mark — pre-qualified providers there typically collect the upper-band rate without negotiation.
| Line item | Rate | Detail |
|---|---|---|
| Hourly labour (Level II) | $63–$93/hr | standard programme rate |
| Hourly labour (Level III) | $136/hr | procedure qualification + disposition |
| Day rate (Level II) | $621/day | 8 hours, ≤30 km from base |
| Equipment surcharge | $305/day | instrument + consumables |
| Mobilisation | $525/trip | medium transport-surcharge band |
| Outage / night-shift uplift | +25–40% | turnaround windows and weekend work |
Effective multiplier vs national base: ×1.09 · transport surcharge band: medium.
Providers covering the Salt Lake City, UT market work to the cadence set by Hill AFB and other anchors like Northrop Grumman Magna (Sentinel ICBM build), Boeing Salt Lake (787 fuselage). Filter the NDT Connect provider list by city to surface crews with current MT qualifications and recent named-site deliverables — three quotes inside 72 hours is the realistic SLA for routine scope.
Major regional clients served
- Hill AFB
- Northrop Grumman Magna (Sentinel ICBM build)
- Boeing Salt Lake (787 fuselage)
- Chevron Salt Lake Refinery
- Marathon Salt Lake City
Across Salt Lake City, UT, MT is the examination refining programmes lean on for crankshaft and rotating-component inspection. The local case is straightforward: 5 refineries N. Salt Lake (largest concentration in Mountain West) drives a workload mix where coker drum cycle accounts for the majority of billable hours, and MT's detection envelope — particularly for sulfidation thinning — is the right technical fit.
Hill AFB and the refinery footprint at Marathon Salt Lake City Refinery set the scope language. Procedures cite BPVC Sec V Art. 7; deliverables are MT report w/ part marking and a written disposition. Programme work dominates the local order book, with PT (for non-ferrous) carried as the standard paired method for cross-coverage.
Where Salt Lake City, UT departs from generic national benchmarks: Five refineries in 15-mile corridor (N. SLC) — densest Mountain West concentration. Northrop Sentinel ICBM solid rocket motor — RT/CT inspection of largest US strategic deterrent program Recurring asset populations are the volume backbone; spot-buys cover the surge.
Credentialing in Salt Lake City, UT runs through Salt Lake ASNT Section (Level II/III), AWS Salt Lake Section (CWI/CWE), and a local API exam centre for pressure-equipment tickets. MT Level II takes about 280 hours of combined classroom and field experience to qualify; the credential stack — ASNT plus CWI plus API 510/570/653 where relevant — is what unlocks the refining job classes that drive local demand.
- ASNT chapter: Salt Lake ASNT Section
- AWS section: AWS Salt Lake Section
- API exam centre: hosted locally
How much does MT cost in Salt Lake City, UT?
MT (Magnetic Particle Testing) day-rates in Salt Lake City, UT typically clear at $621/day for Level II crews, with the pricing multiplier on the national base running ×1.09 (transport surcharge band: medium). Local Level II inspector wages average $79,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.
Which Salt Lake City, UT sites use MT most often?
Hill AFB and Northrop Grumman Magna (Sentinel ICBM build) are the high-volume MT buyers in Salt Lake City, UT. The refinery footprint at Marathon Salt Lake City Refinery is a recurring MT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.
What credentials do MT inspectors need to work in Salt Lake City, UT?
Working MT scope in Salt Lake City, UT requires ASNT Level II for the method (roughly 280 total training hours to qualify), plus Salt Lake ASNT Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. An API exam centre is hosted in Salt Lake City, UT itself.
What refining failure modes does MT screen for in Salt Lake City, UT?
On refining jobs in Salt Lake City, UT, MT is most often called for Weld surface inspection (toe cracks, undercut) screening. Recurring scope on coker drum cycle cycles drives the volume. The technique sits inside UDAQ Air Permits's acceptance framework, and local crews build inspection plans around the failure modes the refining owners audit hardest.
How fast can a MT crew mobilise in Salt Lake City, UT?
Routine MT scope in Salt Lake City, UT typically picks up a certified crew within 24–72 hours of posting a request — the deep contractor base around Hill AFB keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Salt Lake City, UT sites.
What standards govern MT acceptance in Salt Lake City, UT?
MT examinations in Salt Lake City, UT reference BPVC Sec V Art. 7 / BPVC Sec VIII Div 1 Appx 6 as the technical floor and UDAQ Air Permits, UT Boiler Code R616-2 for documentary compliance. Hill AFB's qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.
Method
Magnetic Particle Testing
Abbreviation
MT
Labour band
Tier 1 (×1.18)
Code authority
API 510 / 570
Get a quote
Post a MT scope and receive parallel quotes from certified Salt Lake City providers.
Request a quotePricing caveat
The numbers above are field-anchored ranges, not a quote. Actual Salt Lake City rates vary with scope, accessibility, shift, and contractor utilisation. Always solicit at least three quotes before committing programme spend.
Compare MT rates in nearby cities
Verified Salt Lake City, UT Inspection-Market Data
Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Salt Lake City, UT's actual NDT market, not a generic template.
- Local Wage Anchor — Level I NDT Technician
- $58K/yr typical for Salt Lake City, UT
- Metro Industrial Base
- 1.3M people in Salt Lake City MSA
- Sector Mix (NDT Demand Drivers)
- Refining (20%) · Mining (18%) · Aerospace / Defense (18%)
- Refinery Inventory
- 3+ refineries · ~149K bpd combined capacity — Marathon Salt Lake City Refinery, Chevron Salt Lake Refinery, Big West Oil (FJ Mgmt)
- Active API-Certified Inspectors (regional)
- ~220 API 510 · ~320 API 570 · ~180 API 653
- ASNT Chapter / Community
- Salt Lake ASNT Section
- Cost-of-Living Impact on Rate Cards
- COL index 105.2 (5.2 pts above national avg) · transport surcharge band: medium
Source: BLS OES May 2024 Salt Lake City MSA
Source: US Census ACS 2023
Source: BEA Regional Accounts 2023
Source: EIA Refinery Capacity Report Jan 2025
Source: API ICP roster + state directories (est.)
Source: ASNT chapter directory
Source: C2ER ACCRA COL Index 2024
Continue Reading — In-Depth Guides
Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.
- Magnetic Particle Testing — Complete GuideAC/DC field, wet/dry methods, ASTM E709, yoke.
- NDT Inspection Cost Index [2026]US inspection rates by method & region, and what moves the price.
- Ultrasonic Testing — Complete GuidePhysics, calibration, codes, equipment, applications.
- Radiographic Testing — Complete GuideSources, exposure, IQIs, ASME V, digital RT.
- Penetrant Testing — Complete GuideVisible vs fluorescent, ASTM E165, dwell times.
Join NDT Connect — free
Get MT inspection quotes in Salt Lake City, or list your services — free on NDT Connect.
Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers
