NDT inspection cost in Greenville: Ultrasonic Testing rates
Field-anchored pricing guide for UT (Ultrasonic Testing) and the other five common NDT methods in Greenville, TX. Rates are quoted in USD per hour and reflect the Tier-3 labour band that applies across texas triangle markets.
L3Harris Greenville ISR work runs classified scopes — every NDT inspector cert and every instrument cal has to be audit-defensible without leaking program-sensitive data.
Low band
$203
per hour · routine scope, full-day crew
Typical
$383
per hour · most jobs land here
High band
$630
per hour · turnaround / night shift / rope access
The NDT footprint in Greenville, TX reflects defense aerospace mro's share of the local economy and the supporting isr aircraft modifications cluster. L3Harris ISR work runs classified scopes; cert and cal records must be audit-defensible without leaking program data. Ultrasonic Testing (UT) sits inside the recurring scope mix that L3Harris (Mission Systems), L3Harris Greenville (Mission Systems), and the broader texas triangle operator base put on contract every cycle.
a smaller metro of roughly 90K residents keeps the certified-contractor base deep enough to absorb composite delamination surges without losing schedule. Programmes typically rotate on multi-year intervals, and UT is the examination most often written into the procedure pack at the gate.
Avionics manufacturing adds precision NDT to the defense-MRO mix. Cost-of-living index 90 and the medium transport surcharge band combine into the multiplier procurement teams budget against.
Code compliance on UT work in Greenville, TX starts with the local authority stack — FAA Part 145, NAS 410, MIL-STD-2154. BPVC Sec V Art. 4 (UT general) is the method-level technical standard procedures qualify against, with NAS 410, BPVC Sec V Art. 5 (UT thickness) and BPVC Sec VIII Div 1 UW-53 pulled in when scope crosses into defense aerospace mro territory. L3Harris (Mission Systems) typically requires currency on both layers before a contractor crosses the gate.
- FAA Part 145
- NAS 410
- MIL-STD-2154
- BPVC Sec V Art. 4 (UT general)
- BPVC Sec V Art. 5 (UT thickness)
- BPVC Sec VIII Div 1 UW-53
Ultrasonic Testing (UT) day-rates in Greenville, TX cluster between $494–$741 for Level II crews, with a typical mid-point near $618. The medium transport-surcharge band and a cost-of-living index of 90 push rates below the national baseline (multiplier ×0.95). Local Level II inspector wages — $66,000 median per BLS — anchor that band. Outage windows add 25–40%; volume programmes negotiate 8–15% off.
| Line item | Rate | Detail |
|---|---|---|
| Hourly labour (Level II) | $62–$93/hr | standard programme rate |
| Hourly labour (Level III) | $134/hr | procedure qualification + disposition |
| Day rate (Level II) | $618/day | 8 hours, ≤30 km from base |
| Equipment surcharge | $266/day | instrument + consumables |
| Mobilisation | $525/trip | medium transport-surcharge band |
| Outage / night-shift uplift | +25–40% | turnaround windows and weekend work |
Effective multiplier vs national base: ×0.95 · transport surcharge band: medium.
Certified UT providers in Greenville, TX typically serve a client base anchored by L3Harris (Mission Systems), Texas Instruments (regional), and other texas triangle operators. Posting a scope through NDT Connect routes the request to providers already pre-qualified at these gates — three to five parallel quotes typically return within 24–72 hours.
Major regional clients served
- L3Harris (Mission Systems)
- Texas Instruments (regional)
- regional defense electronics suppliers
UT's role in Greenville, TX's inspection economy is anchored to defense aerospace mro: Defense aerospace MRO is a core industrial driver of NDT demand in Greenville.. The technique earns its keep on lamination detection in plate and pipe, and local pre-job plans are written around recurring asset populations where common defects have to be screened out before return-to-service.
On the ground, that translates to programme inspection windows as the dominant scope, with composite delamination surges layered on every cycle. L3Harris (Mission Systems) typically locks in standing-order coverage; smaller operators time spot-buys against contractor availability. The local pace — measured in 35 sq ft per shift — is what sets contractor utilisation and, downstream, the rate band procurement should expect.
L3Harris ISR work runs classified scopes; cert and cal records must be audit-defensible without leaking program data. Avionics manufacturing adds precision NDT to the defense-MRO mix. On the limitation side, difficult on coarse-grain austenitic stainless and inconel welds — local crews mitigate by procedure-level controls and RT (for volumetric crosscheck) where the indication class warrants it.
The Greenville, TX certification economy is built around ASNT Texas Section, AWS Texas Section, and regional API exam access. Inspectors targeting UT work clear roughly 880 training hours to Level II, then layer AWS CWI and API tickets to qualify into the defense aerospace mro programmes that anchor local demand. Vendor-led training paths feed most of the local pipeline; apprenticeship routes carry the rest.
- ASNT chapter: ASNT Texas Section
- AWS section: AWS Texas Section
- API exam centre: access via nearest regional centre
How much does UT cost in Greenville, TX?
UT (Ultrasonic Testing) day-rates in Greenville, TX typically clear at $618/day for Level II crews, with the pricing multiplier on the national base running ×0.95 (transport surcharge band: medium). Local Level II inspector wages average $66,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.
Which Greenville, TX sites use UT most often?
L3Harris (Mission Systems) and Texas Instruments (regional) are the high-volume UT buyers in Greenville, TX. The defense aerospace mods / isr footprint at L3Harris Greenville (Mission Systems) is a recurring UT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.
What credentials do UT inspectors need to work in Greenville, TX?
Working UT scope in Greenville, TX requires ASNT Level II for the method (roughly 880 total training hours to qualify), plus ASNT Texas Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. API exam logistics route through the nearest regional centre.
What defense aerospace mro failure modes does UT screen for in Greenville, TX?
On defense aerospace mro jobs in Greenville, TX, UT is most often called for Weld inspection (full penetration butt welds, fillet welds) screening. Recurring scope on composite delamination cycles drives the volume. The technique sits inside FAA Part 145's acceptance framework, and local crews build inspection plans around the failure modes the defense aerospace mro owners audit hardest.
How fast can a UT crew mobilise in Greenville, TX?
Routine UT scope in Greenville, TX typically picks up a certified crew within 24–72 hours of posting a request — the established contractor base around L3Harris (Mission Systems) keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Greenville, TX sites.
What standards govern UT acceptance in Greenville, TX?
UT examinations in Greenville, TX reference BPVC Sec V Art. 4 (UT general) / BPVC Sec V Art. 5 (UT thickness) as the technical floor and FAA Part 145, NAS 410 for documentary compliance. L3Harris (Mission Systems)'s qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.
Method
Ultrasonic Testing
Abbreviation
UT
Labour band
Tier 3 (×0.90)
Code authority
FAA Part 145
Get a quote
Post a UT scope and receive parallel quotes from certified Greenville providers.
Request a quotePricing caveat
The numbers above are field-anchored ranges, not a quote. Actual Greenville rates vary with scope, accessibility, shift, and contractor utilisation. Always solicit at least three quotes before committing programme spend.
Compare UT rates in nearby cities
Verified Greenville, TX Inspection-Market Data
Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Greenville, TX's actual NDT market, not a generic template.
- Local Wage Anchor — Level II NDT Technician
- $66K/yr typical for Greenville, TX
- Metro Industrial Base
- 90K people in Greenville, TX
- Sector Mix (NDT Demand Drivers)
- Defense aerospace MRO (45%) · ISR aircraft modifications (32%) · Avionics / electronics manufacturing (23%)
- ASNT Chapter / Community
- ASNT Texas Section
- Cost-of-Living Impact on Rate Cards
- COL index 90.0 (10.0 pts below national avg) · transport surcharge band: medium
Source: BLS OES May 2024 metro tables (NDT inspector proxy occupations)
Source: US Census ACS 2023
Source: BEA Regional Accounts 2023
Source: ASNT chapter directory
Source: C2ER ACCRA COL Index 2024
Continue Reading — In-Depth Guides
Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.
- Ultrasonic Testing — Complete GuidePhysics, calibration, codes, equipment, applications.
- Phased Array UT (PAUT) — Complete GuideBeam steering, focal laws, scan plans, ISO 13588.
- Ultrasonic Testing MethodMethod-level overview, equipment, standards.
- How to Calibrate a UT Flaw DetectorStep-by-step DAC, sensitivity, gate setup.
- How to Perform Thickness Survey on PipingUT scan plan, CMLs, API 570 grid.
Join NDT Connect — free
Get UT inspection quotes in Greenville, or list your services — free on NDT Connect.
Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers
