Skip to content
NDT Connect Logo
Home/Cost Guide/Galveston/Magnetic Particle Testing
Pricing guide · Tier 2 labour band
Galveston, TX

NDT inspection cost in Galveston: Magnetic Particle Testing rates

Field-anchored pricing guide for MT (Magnetic Particle Testing) and the other five common NDT methods in Galveston, TX. Rates are quoted in USD per hour and reflect the Tier-2 labour band that applies across gulf coast markets.

Cruise-ship turnaround windows in Galveston are measured in hours — a UT operator without a current SNT-TC-1A renewal can scrap a 36-hour hull-thickness survey before it begins.

Low band

$175

per hour · routine scope, full-day crew

Typical

$325

per hour · most jobs land here

High band

$550

per hour · turnaround / night shift / rope access

Local market overview — Galveston, TX

Galveston, TX runs a mid-band NDT economy that pivots around port & cruise (35% of the local industrial base) and marine services, with secondary load from petrochem (proximity). Port of Galveston — major cruise terminal + cargo feeds the MT workload that defines this market — a smaller metro of roughly 52K residents sustains a contractor pool calibrated to that demand cadence.

Anchor employers like Port of Galveston and Port of Galveston write Magnetic Particle Testing into recurring scope packages. Gantry crane fatigue scan cycles dominate the calendar — pre-qualification at Port of Galveston alone unlocks the volume backbone of the Galveston, TX MT contractor base. Cruise ship dry-dock UT thickness gauging is unique service.

Local Level II inspector wages run roughly $80,000/year per BLS, anchoring the day-rate band that providers quote in Galveston, TX against a cost-of-living index of 90. Avoid hurricane season Jun-Nov compresses the calendar; spot-buy crews cover the surge. MT is consistently among the methods most often written into procedure packs at the city's anchor sites.

Regional code context — MT in Galveston, TX

Acceptance criteria for MT in the gulf coast corridor lean on BPVC Sec V Art. 7 as the technical floor and on TPSC / TCEQ for documentary survival. Industry-specific: AWS D1.1 is the cross-reference the procedure must close on. Owners audit the calibration trail and Level III sign-off on every recurring scope, and Port of Galveston runs its own qualification matrix on top.

  • TPSC
  • TCEQ
  • USCG Subchapter L
  • BPVC Sec V Art. 7
  • BPVC Sec VIII Div 1 Appx 6
  • B31.3 para 344.3
Local pricing breakdown — MT in Galveston, TX

Procurement-grade rates for MT in Galveston, TX: $483–$714/day Level II, $1050/day Level III. BLS reports median Level II inspector wages of $80,000 for the Galveston, TX MSA — the day-rate covers wage plus equipment, mobilisation, calibration overhead, and contractor margin. Transport surcharge: medium. Effective multiplier vs national base: ×1.05.

Line itemRateDetail
Hourly labour (Level II)$60–$89/hrstandard programme rate
Hourly labour (Level III)$131/hrprocedure qualification + disposition
Day rate (Level II)$599/day8 hours, ≤30 km from base
Equipment surcharge$294/dayinstrument + consumables
Mobilisation$525/tripmedium transport-surcharge band
Outage / night-shift uplift+25–40%turnaround windows and weekend work

Effective multiplier vs national base: ×1.05 · transport surcharge band: medium.

Top local providers — MT in Galveston, TX

Active MT providers serving Galveston, TX hold pre-qualification packages for Port of Galveston and Galveston Wharves as table stakes. The directory filters by Level II/III currency, MT-specific procedure history, and instrument calibration date — letting buyers shortlist crews who can mobilise without a fresh onboarding cycle.

Major regional clients served

  • Port of Galveston
  • Galveston Wharves
  • American National Insurance (HQ)
  • UTMB Galveston (medical)
  • Marine survey contractors
Find MT providers in Galveston, TX
MT in Galveston, TX — local applications

Magnetic Particle Testing (MT) in Galveston, TX is most often pulled into scope when port & cruise operators need to qualify STS gantry crane against TPSC. The technique is the default examination for pre/post-pwht verification on pressure equipment — and on Galveston, TX jobs, the use case typically narrows to gantry crane fatigue scan where fatigue at crane gusset is the failure mechanism owners are screening for.

The dominant scope here is inspection during scheduled outages. Port of Galveston writes MT into the procedure pack on every cycle, and the local crews who run this scope daily have built the calibration libraries, scan plans, and reporting templates that Galveston, TX owners have come to expect. Cruise ship dry-dock UT thickness gauging is unique service. Procedures cite BPVC Sec V Art. 7; deliverables ship as MT report w/ part marking with Level II/III written disposition.

Worth flagging: ferromagnetic only (no austenitic stainless, aluminium, copper). Galveston, TX crews work around this with paired methods (typically PT (for non-ferrous) as a crosscheck) and procedure-level mitigations — offshore gulf service vessel inspection — hvac, hull, propulsion shafts. Port of Galveston's site-specific qualification matrix layers an additional acceptance gate on top, so contractors who already hold the MT pre-qual win the bid before rate negotiation even starts.

Local certification path — Galveston, TX

Houston ASNT Section anchors MT certification in Galveston, TX; AWS Houston handles welding-inspector credentials. Practical experience requirement is roughly 280 total hours to Level II — typically split between vendor classroom time at a regional training provider and supervised on-the-job hours at Port of Galveston. API exam access is regional; the port & cruise operators here generally require currency on all three credential tracks.

  • ASNT chapter: Houston ASNT Section
  • AWS section: AWS Houston
  • API exam centre: access via nearest regional centre
MT in Galveston, TX — frequently asked questions
How much does MT cost in Galveston, TX?

MT (Magnetic Particle Testing) day-rates in Galveston, TX typically clear at $599/day for Level II crews, with the pricing multiplier on the national base running ×1.05 (transport surcharge band: medium). Local Level II inspector wages average $80,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.

Which Galveston, TX sites use MT most often?

Port of Galveston and Galveston Wharves are the high-volume MT buyers in Galveston, TX. The port footprint at Port of Galveston is a recurring MT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.

What credentials do MT inspectors need to work in Galveston, TX?

Working MT scope in Galveston, TX requires ASNT Level II for the method (roughly 280 total training hours to qualify), plus Houston ASNT Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. API exam logistics route through the nearest regional centre.

What port & cruise failure modes does MT screen for in Galveston, TX?

On port & cruise jobs in Galveston, TX, MT is most often called for Weld surface inspection (toe cracks, undercut) screening. Recurring scope on gantry crane fatigue scan cycles drives the volume. The technique sits inside TPSC's acceptance framework, and local crews build inspection plans around the failure modes the port & cruise owners audit hardest.

How fast can a MT crew mobilise in Galveston, TX?

Routine MT scope in Galveston, TX typically picks up a certified crew within 24–72 hours of posting a request — the established contractor base around Port of Galveston keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Galveston, TX sites.

What standards govern MT acceptance in Galveston, TX?

MT examinations in Galveston, TX reference BPVC Sec V Art. 7 / BPVC Sec VIII Div 1 Appx 6 as the technical floor and TPSC, TCEQ for documentary compliance. Port of Galveston's qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.

Quick reference

Method

Magnetic Particle Testing

Abbreviation

MT

Labour band

Tier 21.00)

Code authority

USCG for marine terminals

Get a quote

Post a MT scope and receive parallel quotes from certified Galveston providers.

Request a quote

Pricing caveat

The numbers above are field-anchored ranges, not a quote. Actual Galveston rates vary with scope, accessibility, shift, and contractor utilisation. Always solicit at least three quotes before committing programme spend.

Verified Galveston, TX Inspection-Market Data

Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Galveston, TX's actual NDT market, not a generic template.

Local Wage Anchor — Level I NDT Technician
$58K/yr typical for Galveston, TX

Source: BLS OES Houston MSA 2024

Metro Industrial Base
52K people in Galveston, TX

Source: US Census ACS 2023

Sector Mix (NDT Demand Drivers)
Port & Cruise (35%) · Marine Services (30%) · Petrochem (proximity) (20%)

Source: BEA Regional Accounts 2023

Port / Marine Workload
Port of Galveston

Source: AAPA US Port Rankings 2023

Active API-Certified Inspectors (regional)
~20 API 510 · ~25 API 570 · ~15 API 653

Source: API ICP roster + state directories (est.)

ASNT Chapter / Community
Houston ASNT Section

Source: ASNT chapter directory

Cost-of-Living Impact on Rate Cards
COL index 90.0 (10.0 pts below national avg) · transport surcharge band: medium

Source: C2ER ACCRA COL Index 2024

Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.

Join NDT Connect — free

Get MT inspection quotes in Galveston, or list your services — free on NDT Connect.

Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers