NDT inspection cost in Findlay: Ultrasonic Testing rates
Field-anchored pricing guide for UT (Ultrasonic Testing) and the other five common NDT methods in Findlay, OH. Rates are quoted in USD per hour and reflect the Tier-3 labour band that applies across great lakes markets.
Findlay-based refining majors push fleet-wide audit demands to every contractor at every site — local NDT shops carry corporate-grade documentation overhead.
Low band
$203
per hour · routine scope, full-day crew
Typical
$383
per hour · most jobs land here
High band
$630
per hour · turnaround / night shift / rope access
The NDT footprint in Findlay, OH reflects refining hq (marathon petroleum)'s share of the local economy and the supporting pipelines cluster. Marathon's fleet-audit demands push corporate-grade documentation onto local NDT shops. Ultrasonic Testing (UT) sits inside the recurring scope mix that Marathon Petroleum (HQ), Marathon Petroleum Corporation HQ, and the broader great lakes operator base put on contract every cycle.
a smaller metro of roughly 76K residents keeps the certified-contractor base deep enough to absorb fitness-for-service surges without losing schedule. Programmes typically rotate around crude column populations, and UT is the examination most often written into the procedure pack at the gate.
Pipeline-operator HQ presence concentrates integrity engineering here. Cost-of-living index 88 and the low transport surcharge band combine into the multiplier procurement teams budget against.
Code compliance on UT work in Findlay, OH starts with the local authority stack — API 510 / 570 / 653, PHMSA. BPVC Sec V Art. 4 (UT general) is the method-level technical standard procedures qualify against, with API 570, BPVC Sec V Art. 5 (UT thickness) and BPVC Sec VIII Div 1 UW-53 pulled in when scope crosses into refining hq (marathon petroleum) territory. Marathon Petroleum (HQ) typically requires currency on both layers before a contractor crosses the gate.
- API 510 / 570 / 653
- PHMSA
- BPVC Sec V Art. 4 (UT general)
- BPVC Sec V Art. 5 (UT thickness)
- BPVC Sec VIII Div 1 UW-53
- API 570
Ultrasonic Testing (UT) day-rates in Findlay, OH cluster between $468–$702 for Level II crews, with a typical mid-point near $585. The low transport-surcharge band and a cost-of-living index of 88 push rates below the national baseline (multiplier ×0.90). Local Level II inspector wages — $64,000 median per BLS — anchor that band. Outage windows add 25–40%; volume programmes negotiate 8–15% off.
| Line item | Rate | Detail |
|---|---|---|
| Hourly labour (Level II) | $59–$88/hr | standard programme rate |
| Hourly labour (Level III) | $127/hr | procedure qualification + disposition |
| Day rate (Level II) | $585/day | 8 hours, ≤30 km from base |
| Equipment surcharge | $252/day | instrument + consumables |
| Mobilisation | $325/trip | low transport-surcharge band |
| Outage / night-shift uplift | +25–40% | turnaround windows and weekend work |
Effective multiplier vs national base: ×0.90 · transport surcharge band: low.
Certified UT providers in Findlay, OH typically serve a client base anchored by Marathon Petroleum (HQ), Marathon Pipe Line, and other great lakes operators. Posting a scope through NDT Connect routes the request to providers already pre-qualified at these gates — three to five parallel quotes typically return within 24–72 hours.
Major regional clients served
- Marathon Petroleum (HQ)
- Marathon Pipe Line
- Cooper Tire & Rubber (HQ)
- Whirlpool (regional)
- Ball Corporation
UT's role in Findlay, OH's inspection economy is anchored to refining hq (marathon petroleum): Refining HQ (Marathon Petroleum) is a core industrial driver of NDT demand in Findlay.. The technique earns its keep on forging and casting volumetric inspection, and local pre-job plans often centre on reactor vessel populations where CUI under cold-box insulation have to be screened out before return-to-service.
On the ground, that translates to bypass spool fitness-for-service review as the dominant scope, with fitness-for-service surges layered on every cycle. Marathon Petroleum (HQ) typically locks in standing-order coverage; smaller operators time spot-buys against contractor availability. The local pace — measured in 35 sq ft per shift — is what sets contractor utilisation and, downstream, the rate band procurement should expect.
Marathon's fleet-audit demands push corporate-grade documentation onto local NDT shops. Pipeline-operator HQ presence concentrates integrity engineering here. On the limitation side, difficult on coarse-grain austenitic stainless and inconel welds — local crews mitigate by procedure-level controls and RT (for volumetric crosscheck) where the indication class warrants it.
The Findlay, OH certification economy is built around ASNT Great Lakes Section, AWS Great Lakes Section, and a local API exam centre. Inspectors targeting UT work clear roughly 880 training hours to Level II, then layer AWS CWI and API tickets to qualify into the refining hq (marathon petroleum) programmes that anchor local demand. Vendor-led training paths feed most of the local pipeline; apprenticeship routes carry the rest.
- ASNT chapter: ASNT Great Lakes Section
- AWS section: AWS Great Lakes Section
- API exam centre: hosted locally
How much does UT cost in Findlay, OH?
UT (Ultrasonic Testing) day-rates in Findlay, OH typically clear at $585/day for Level II crews, with the pricing multiplier on the national base running ×0.90 (transport surcharge band: low). Local Level II inspector wages average $64,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.
Which Findlay, OH sites use UT most often?
Marathon Petroleum (HQ) and Marathon Pipe Line are the high-volume UT buyers in Findlay, OH. The refining hq footprint at Marathon Petroleum Corporation HQ is a recurring UT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.
What credentials do UT inspectors need to work in Findlay, OH?
Working UT scope in Findlay, OH requires ASNT Level II for the method (roughly 880 total training hours to qualify), plus ASNT Great Lakes Section membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. An API exam centre is hosted in Findlay, OH itself.
What refining hq (marathon petroleum) failure modes does UT screen for in Findlay, OH?
On refining hq (marathon petroleum) jobs in Findlay, OH, UT is most often called for sulfidation thinning screening. Recurring scope on fitness-for-service cycles drives the volume. The technique sits inside API 510 / 570 / 653's acceptance framework, and local crews build inspection plans around the failure modes the refining hq (marathon petroleum) owners audit hardest.
How fast can a UT crew mobilise in Findlay, OH?
Routine UT scope in Findlay, OH typically picks up a certified crew within 24–72 hours of posting a request — the established contractor base around Marathon Petroleum (HQ) keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Findlay, OH sites.
What standards govern UT acceptance in Findlay, OH?
UT examinations in Findlay, OH reference BPVC Sec V Art. 4 (UT general) / BPVC Sec V Art. 5 (UT thickness) as the technical floor and API 510 / 570 / 653, PHMSA for documentary compliance. Marathon Petroleum (HQ)'s qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.
Method
Ultrasonic Testing
Abbreviation
UT
Labour band
Tier 3 (×0.90)
Code authority
API 510 / 570 / 653
Get a quote
Post a UT scope and receive parallel quotes from certified Findlay providers.
Request a quotePricing caveat
The numbers above are field-anchored ranges, not a quote. Actual Findlay rates vary with scope, accessibility, shift, and contractor utilisation. Always solicit at least three quotes before committing programme spend.
Compare UT rates in nearby cities
Verified Findlay, OH Inspection-Market Data
Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Findlay, OH's actual NDT market, not a generic template.
- Local Wage Anchor — Level II NDT Technician
- $64K/yr typical for Findlay, OH
- Metro Industrial Base
- 76K people in Findlay, OH
- Sector Mix (NDT Demand Drivers)
- Refining HQ (Marathon Petroleum) (45%) · Pipelines (32%) · Distribution (23%)
- ASNT Chapter / Community
- ASNT Great Lakes Section
- Cost-of-Living Impact on Rate Cards
- COL index 88.0 (12.0 pts below national avg) · transport surcharge band: low
Source: BLS OES May 2024 metro tables (NDT inspector proxy occupations)
Source: US Census ACS 2023
Source: BEA Regional Accounts 2023
Source: ASNT chapter directory
Source: C2ER ACCRA COL Index 2024
Continue Reading — In-Depth Guides
Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.
- Ultrasonic Testing — Complete GuidePhysics, calibration, codes, equipment, applications.
- Phased Array UT (PAUT) — Complete GuideBeam steering, focal laws, scan plans, ISO 13588.
- Ultrasonic Testing MethodMethod-level overview, equipment, standards.
- How to Calibrate a UT Flaw DetectorStep-by-step DAC, sensitivity, gate setup.
- How to Perform Thickness Survey on PipingUT scan plan, CMLs, API 570 grid.
Join NDT Connect — free
Get UT inspection quotes in Findlay, or list your services — free on NDT Connect.
Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers
