Skip to content
NDT Connect Logo
Home/Cost Guide/Augusta/Magnetic Particle Testing
Pricing guide · Tier 2 labour band
Augusta, GA

NDT inspection cost in Augusta: Magnetic Particle Testing rates

Field-anchored pricing guide for MT (Magnetic Particle Testing) and the other five common NDT methods in Augusta, GA. Rates are quoted in USD per hour and reflect the Tier-2 labour band that applies across southeast markets.

Vogtle 3 and 4 are the first new US AP1000s in operation — every ISI weld follows ASME Section XI and a Level III qual gap is treated as a regulatory event, not a paperwork issue.

Low band

$175

per hour · routine scope, full-day crew

Typical

$325

per hour · most jobs land here

High band

$550

per hour · turnaround / night shift / rope access

Local market overview — Augusta, GA

Augusta, GA runs a mid-band NDT economy that pivots around nuclear (srs) (40% of the local industrial base) and manufacturing, with secondary load from defense. Savannah River Site — major DOE nuclear complex feeds the MT workload that defines this market — a mid-band metro of about 611K residents sustains a contractor pool calibrated to that demand cadence.

Anchor employers like Savannah River Site (SRS) and Savannah River Site write Magnetic Particle Testing into recurring scope packages. ASME Section XI inspection cycles dominate the calendar — pre-qualification at Savannah River Site (SRS) alone unlocks the volume backbone of the Augusta, GA MT contractor base. Plant Vogtle 3+4 — first new US reactors in 30+ years; ongoing inspection scope.

Local Level II inspector wages run roughly $78,000/year per BLS, anchoring the day-rate band that providers quote in Augusta, GA against a cost-of-living index of 88. Spring/Fall TARs compresses the calendar; spot-buy crews cover the surge. MT is consistently among the methods most often written into procedure packs at the city's anchor sites.

Regional code context — MT in Augusta, GA

Acceptance criteria for MT in the southeast corridor lean on BPVC Sec V Art. 7 as the technical floor and on DOE 10 CFR 830 / ASME Section III/XI (nuclear) for documentary survival. Industry-specific: 10 CFR 50 Appendix B is the cross-reference the procedure must close on. Owners audit the calibration trail and Level III sign-off on every recurring scope, and Savannah River Site (SRS) runs its own qualification matrix on top.

  • DOE 10 CFR 830
  • ASME Section III/XI (nuclear)
  • 10 CFR 50 (commercial nuclear)
  • BPVC Sec V Art. 7
  • BPVC Sec VIII Div 1 Appx 6
  • B31.3 para 344.3
Local pricing breakdown — MT in Augusta, GA

Procurement-grade rates for MT in Augusta, GA: $483–$714/day Level II, $1050/day Level III. BLS reports median Level II inspector wages of $78,000 for the Augusta, GA MSA — the day-rate covers wage plus equipment, mobilisation, calibration overhead, and contractor margin. Transport surcharge: medium. Effective multiplier vs national base: ×1.05.

Line itemRateDetail
Hourly labour (Level II)$60–$89/hrstandard programme rate
Hourly labour (Level III)$131/hrprocedure qualification + disposition
Day rate (Level II)$599/day8 hours, ≤30 km from base
Equipment surcharge$294/dayinstrument + consumables
Mobilisation$525/tripmedium transport-surcharge band
Outage / night-shift uplift+25–40%turnaround windows and weekend work

Effective multiplier vs national base: ×1.05 · transport surcharge band: medium.

Top local providers — MT in Augusta, GA

Active MT providers serving Augusta, GA hold pre-qualification packages for Savannah River Site (SRS) and Plant Vogtle (Southern Nuclear) as table stakes. The directory filters by Level II/III currency, MT-specific procedure history, and instrument calibration date — letting buyers shortlist crews who can mobilise without a fresh onboarding cycle.

Major regional clients served

  • Savannah River Site (SRS)
  • Plant Vogtle (Southern Nuclear)
  • Bechtel SRS
  • Centerra-SRS
  • International Paper
Find MT providers in Augusta, GA
MT in Augusta, GA — local applications

Magnetic Particle Testing (MT) in Augusta, GA is most often pulled into scope when nuclear (srs) operators need to qualify main steam line against DOE 10 CFR 830. The technique is the default examination for forging and casting surface flaw detection — and on Augusta, GA jobs, the use case typically narrows to ASME Section XI inspection where IGSCC is the failure mechanism owners are screening for.

The dominant scope here is ISI examination of vessel weld. Savannah River Site (SRS) writes MT into the procedure pack on every cycle, and the local crews who run this scope daily have built the calibration libraries, scan plans, and reporting templates that Augusta, GA owners have come to expect. Plant Vogtle 3+4 — first new US reactors in 30+ years; ongoing inspection scope. Procedures cite BPVC Sec V Art. 7; deliverables ship as MT report w/ part marking with Level II/III written disposition.

Worth flagging: ferromagnetic only (no austenitic stainless, aluminium, copper). Augusta, GA crews work around this with paired methods (typically PT (for non-ferrous) as a crosscheck) and procedure-level mitigations — srs h-canyon — only operating production-scale nuclear reprocessing in us. Savannah River Site (SRS)'s site-specific qualification matrix layers an additional acceptance gate on top, so contractors who already hold the MT pre-qual win the bid before rate negotiation even starts.

Local certification path — Augusta, GA

ASNT South Carolina/Georgia (Augusta-Aiken area) anchors MT certification in Augusta, GA; AWS GA regional handles welding-inspector credentials. Practical experience requirement is roughly 280 total hours to Level II — typically split between vendor classroom time at a regional training provider and supervised on-the-job hours at Savannah River Site (SRS). API exam centre access is local; the nuclear (srs) operators here generally require currency on all three credential tracks.

  • ASNT chapter: ASNT South Carolina/Georgia (Augusta-Aiken area)
  • AWS section: AWS GA regional
  • API exam centre: hosted locally
MT in Augusta, GA — frequently asked questions
How much does MT cost in Augusta, GA?

MT (Magnetic Particle Testing) day-rates in Augusta, GA typically clear at $599/day for Level II crews, with the pricing multiplier on the national base running ×1.05 (transport surcharge band: medium). Local Level II inspector wages average $78,000/year per BLS, which anchors that day-rate band. Always solicit at least three parallel quotes before committing programme spend.

Which Augusta, GA sites use MT most often?

Savannah River Site (SRS) and Plant Vogtle (Southern Nuclear) are the high-volume MT buyers in Augusta, GA. The nuclear footprint at Savannah River Site is a recurring MT mobilisation point. Pre-qualification at these gates is what unlocks the volume contracts.

What credentials do MT inspectors need to work in Augusta, GA?

Working MT scope in Augusta, GA requires ASNT Level II for the method (roughly 280 total training hours to qualify), plus ASNT South Carolina/Georgia (Augusta-Aiken area) membership is common. AWS CWI is required for welding-related scope; API 510/570/653 tickets unlock pressure-equipment work. An API exam centre is hosted in Augusta, GA itself.

What nuclear (srs) failure modes does MT screen for in Augusta, GA?

On nuclear (srs) jobs in Augusta, GA, MT is most often called for IGSCC screening. Recurring scope on ASME Section XI inspection cycles drives the volume. The technique sits inside DOE 10 CFR 830's acceptance framework, and local crews build inspection plans around the failure modes the nuclear (srs) owners audit hardest.

How fast can a MT crew mobilise in Augusta, GA?

Routine MT scope in Augusta, GA typically picks up a certified crew within 24–72 hours of posting a request — the established contractor base around Savannah River Site (SRS) keeps mobilisation lead times short. Outage windows and turnaround support are negotiated against rotation; post the scope to NDT Connect to receive parallel quotes from providers already pre-qualified at Augusta, GA sites.

What standards govern MT acceptance in Augusta, GA?

MT examinations in Augusta, GA reference BPVC Sec V Art. 7 / BPVC Sec VIII Div 1 Appx 6 as the technical floor and DOE 10 CFR 830, ASME Section III/XI (nuclear) for documentary compliance. Savannah River Site (SRS)'s qualification matrix layers an additional customer-specific spec on top — procedures must close on all three before the crew is cleared at the gate.

Quick reference

Method

Magnetic Particle Testing

Abbreviation

MT

Labour band

Tier 21.00)

Code authority

ASME Section III / XI

Get a quote

Post a MT scope and receive parallel quotes from certified Augusta providers.

Request a quote

Pricing caveat

The numbers above are field-anchored ranges, not a quote. Actual Augusta rates vary with scope, accessibility, shift, and contractor utilisation. Always solicit at least three quotes before committing programme spend.

Verified Augusta, GA Inspection-Market Data

Hard numbers from BLS, EIA, AAPA, Census & API directories — anchoring this page to Augusta, GA's actual NDT market, not a generic template.

Local Wage Anchor — Level I NDT Technician
$56K/yr typical for Augusta, GA

Source: BLS OES GA state 2024

Metro Industrial Base
611K people in Augusta, GA

Source: US Census ACS 2023

Sector Mix (NDT Demand Drivers)
Nuclear (SRS) (40%) · Manufacturing (22%) · Defense (18%)

Source: BEA Regional Accounts 2023

Active API-Certified Inspectors (regional)
~20 API 510 · ~25 API 570 · ~15 API 653

Source: API ICP roster + state directories (est.)

ASNT Chapter / Community
ASNT South Carolina/Georgia (Augusta-Aiken area)

Source: ASNT chapter directory

Cost-of-Living Impact on Rate Cards
COL index 88.0 (12.0 pts below national avg) · transport surcharge band: medium

Source: C2ER ACCRA COL Index 2024

Authored by ASNT Level III inspectors. Real procedures, real numbers, real codes.

Join NDT Connect — free

Get MT inspection quotes in Augusta, or list your services — free on NDT Connect.

Free to join · No credit card · Provider profiles verified against ASNT & API rosters · Browse providers